Last night I ran into 2 problems with nzbs and they both had files with all different names, Upon manually renaming all the rars to the same they unpacked fine. The 2 releases are as follows
Cult.S01E13.HDTV.x264-LOL
[f16f82e1772dc978f7539f6e9a1f800f] Unpacked 0 files/folders in 0 seconds
[60802c9c4f963a6bdc51a46915af1b20] Unpacking failed, unable to find 60802c9c4f963a6bdc51a46915af1b20.r05
[0c00c14803025ab54882605369e935cc] Unpacking failed, unable to find 0c00c14803025ab54882605369e935cc.r13
[af62cfd3a76b9372964d8f76e4cbc079] Unpacking failed, unable to find af62cfd3a76b9372964d8f76e4cbc079.r12
[b911d08f955b72f6b83ce8299813dff1] Unpacking failed, unable to find b911d08f955b72f6b83ce8299813dff1.r07
[333625c43cbc96e8e074444e8135e93e] Unpacking failed, unable to find 333625c43cbc96e8e074444e8135e93e.r10
[07f05d3843249bda21ebf0938fc26610] Unpacking failed, unable to find 07f05d3843249bda21ebf0938fc26610.r02
[37cbbb8b1af245840590da2c13a650f7] Unpacking failed, unable to find 37cbbb8b1af245840590da2c13a650f7.r04
[b386214e89b52aaf230ed2942295b396] Unpacking failed, unable to find b386214e89b52aaf230ed2942295b396.r09
[2ef42e40906f94639a05c6a819df0ba2] Unpacking failed, unable to find 2ef42e40906f94639a05c6a819df0ba2.r00
[741eacff02d4bb45a07d7644f63722cf] Unpacking failed, unable to find 741eacff02d4bb45a07d7644f63722cf.r06
[cf337ff53ea8e98323ddf360899305ad] Unpacking failed, unable to find cf337ff53ea8e98323ddf360899305ad.r11
[e177102aef085e7033f63631b5a19467] Unpacking failed, unable to find e177102aef085e7033f63631b5a19467.r08
[91de175ea9bb31fd32166bbfa67e26c0] Unpacking failed, unable to find 91de175ea9bb31fd32166bbfa67e26c0.r03
[3cff2e91ebbb387c29b96fe501ff2794] Unpacking failed, unable to find 3cff2e91ebbb387c29b96fe501ff2794.r01
[c7fb06db24b653936df14366e2e46bcb] Unpacking failed, unable to find c7fb06db24b653936df14366e2e46bcb.r14
and
Magic.City.S02E04.HDTV.x264-2HD
Unpack [f16f82e1772dc978f7539f6e9a1f800f] Unpacked 0 files/folders in 0 seconds
[60802c9c4f963a6bdc51a46915af1b20] Unpacking failed, unable to find 60802c9c4f963a6bdc51a46915af1b20.r05
[0c00c14803025ab54882605369e935cc] Unpacking failed, unable to find 0c00c14803025ab54882605369e935cc.r13
[af62cfd3a76b9372964d8f76e4cbc079] Unpacking failed, unable to find af62cfd3a76b9372964d8f76e4cbc079.r12
[b911d08f955b72f6b83ce8299813dff1] Unpacking failed, unable to find b911d08f955b72f6b83ce8299813dff1.r07
[333625c43cbc96e8e074444e8135e93e] Unpacking failed, unable to find 333625c43cbc96e8e074444e8135e93e.r10
[07f05d3843249bda21ebf0938fc26610] Unpacking failed, unable to find 07f05d3843249bda21ebf0938fc26610.r02
[37cbbb8b1af245840590da2c13a650f7] Unpacking failed, unable to find 37cbbb8b1af245840590da2c13a650f7.r04
[b386214e89b52aaf230ed2942295b396] Unpacking failed, unable to find b386214e89b52aaf230ed2942295b396.r09
[2ef42e40906f94639a05c6a819df0ba2] Unpacking failed, unable to find 2ef42e40906f94639a05c6a819df0ba2.r00
[741eacff02d4bb45a07d7644f63722cf] Unpacking failed, unable to find 741eacff02d4bb45a07d7644f63722cf.r06
[cf337ff53ea8e98323ddf360899305ad] Unpacking failed, unable to find cf337ff53ea8e98323ddf360899305ad.r11
[e177102aef085e7033f63631b5a19467] Unpacking failed, unable to find e177102aef085e7033f63631b5a19467.r08
[91de175ea9bb31fd32166bbfa67e26c0] Unpacking failed, unable to find 91de175ea9bb31fd32166bbfa67e26c0.r03
[3cff2e91ebbb387c29b96fe501ff2794] Unpacking failed, unable to find 3cff2e91ebbb387c29b96fe501ff2794.r01
[c7fb06db24b653936df14366e2e46bcb] Unpacking failed, unable to find c7fb06db24b653936df14366e2e46bcb.r14
Problems with Encryption in Sab 0.7.14
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Problems with Encryption in Sab 0.7.14
I can confirm I have this same issue. I tested the same .nzb for Cult. The problem seems to be the different filenames gives Sabnzbd problems so it's not able to unpack them.
Re: Problems with Encryption in Sab 0.7.14
SABnzbd will correct most naming nonsense, but not all.
Please email one or more NZB files to [email protected]
and add the URL of this message and the name of the operating sytem.
Please email one or more NZB files to [email protected]
and add the URL of this message and the name of the operating sytem.
-
majortripps69
- Release Testers
- Posts: 7
- Joined: November 13th, 2009, 12:33 pm
Re: Problems with Encryption in Sab 0.7.14
I sent in a few extras that I have had happen as well if this helps with troubleshooting. Thanks.
Re: Problems with Encryption in Sab 0.7.14
I also hit this problem with tv series, "The Fall" Season 1, E1-E5 and also "The Borgias" Season 3, E01-E10.. So far, neither series appear to be encryption related, although I've only checked on a few (3) eps of The FAll.. They each produced 3 PAR2 files with missing blocks showing via a manual Quickpar runs against each.
I ran Quickpar against The Fall, S01E05 and E03 and they both showed an SFV file as being the 1 missing block, but WinRar ran fine against the main RAR file and produced the MKV file.. The Subs had a diff par2 and that produced a SUB file with another RAR which contained the IDX file. Didnt bother with the Sample.. I've seen this embedded RAR files being used before, so I assume it gets handled okay (when it works.)
On the E4 eps, the missing blocks error (via manual Quickpar) showed 114 missing blocks for the sample par2. The main and subs par2s checked out fine manually and Winrar ran against these okay.
Extracted below shows warning:
WARNING:: Paused job "The.Fall.S01E05.720p.BluRay.x264-ROVERS" because of encrypted RAR file
WARNING:: Paused job "The.Borgias.S03E10.720p.BluRay.x264-DEMAND" because of encrypted RAR file
Hope this helps..
Rick
I ran Quickpar against The Fall, S01E05 and E03 and they both showed an SFV file as being the 1 missing block, but WinRar ran fine against the main RAR file and produced the MKV file.. The Subs had a diff par2 and that produced a SUB file with another RAR which contained the IDX file. Didnt bother with the Sample.. I've seen this embedded RAR files being used before, so I assume it gets handled okay (when it works.)
On the E4 eps, the missing blocks error (via manual Quickpar) showed 114 missing blocks for the sample par2. The main and subs par2s checked out fine manually and Winrar ran against these okay.
Extracted below shows warning:
WARNING:: Paused job "The.Fall.S01E05.720p.BluRay.x264-ROVERS" because of encrypted RAR file
WARNING:: Paused job "The.Borgias.S03E10.720p.BluRay.x264-DEMAND" because of encrypted RAR file
Hope this helps..
Rick
Re: Problems with Encryption in Sab 0.7.14
Update: I just manually processed all the failed episodes and none of them were encryption problems. Most of the failures were via Quickpar failing on Samples pars with missing blocks. A few were from the Subs pars with 1 missing block for the sfv files. All episodes were successfully unpacked via WinRar manually.. FYI.. Rick
Edit: I should mention I'm running on Win7 with 7.14.. Rick
Edit: When I was cleaning up the paused entries after manually processing the incompletes, I clicked on one of the entries and it showed the sample mkv file, so I selected it and then deleted it. Went back to the home page and unpaused it. It then ran to a successful competion. Wish I had found this out earlier as it would have saved me considerable time. Hope this helps someone else out.. FYI.. Rick
Edit: I should mention I'm running on Win7 with 7.14.. Rick
Edit: When I was cleaning up the paused entries after manually processing the incompletes, I clicked on one of the entries and it showed the sample mkv file, so I selected it and then deleted it. Went back to the home page and unpaused it. It then ran to a successful competion. Wish I had found this out earlier as it would have saved me considerable time. Hope this helps someone else out.. FYI.. Rick
Re: Problems with Encryption in Sab 0.7.14
Im running into alot of what i hope are "false" encryption hits. Could you elaborate on what you're doing to manually process them? Are you going to the folder (incomplete and/or complete) and then running some command line utilities? Or are you somehow re-injecting the job back into SABnzbdrl85733 wrote:Update: I just manually processed all the failed episodes and none of them were encryption problems. Most of the failures were via Quickpar failing on Samples pars with missing blocks. A few were from the Subs pars with 1 missing block for the sfv files. All episodes were successfully unpacked via WinRar manually.. FYI.. Rick
Edit: I should mention I'm running on Win7 with 7.14.. Rick
Edit: When I was cleaning up the paused entries after manually processing the incompletes, I clicked on one of the entries and it showed the sample mkv file, so I selected it and then deleted it. Went back to the home page and unpaused it. It then ran to a successful competion. Wish I had found this out earlier as it would have saved me considerable time. Hope this helps someone else out.. FYI.. Rick
All I get is: "Aborted, encryption detected", status: FAILED in the GUI.
-Mark
Re: Problems with Encryption in Sab 0.7.14
Known problem as far as wrong detection is concerned.mtakacs wrote:rl85733 wrote: All I get is: "Aborted, encryption detected", status: FAILED in the GUI.
-Mark
The latter is because you chose to abort instead of pause such a job (see Config->Switches).
-
squirrellydw
- Newbie
- Posts: 1
- Joined: September 21st, 2013, 3:23 pm
Re: Problems with Encryption in Sab 0.7.14
So I understand what abort does, but if I pause it what would that do, just let it sit there? Would that fix the problem?
Re: Problems with Encryption in Sab 0.7.14
Abort sends the job to History as a failed job.
Pause lets it sit in the download queue until you decide what to do.
Pause lets it sit in the download queue until you decide what to do.
Re: Problems with Encryption in Sab 0.7.14
So, I am running Sab 0.7.20 and I have the same problem, "Encrypted / The 100 S03E01 blah blah blah, but I did not pause the download, SabNZB did. Are there passwords that must be entered in order to get past this point. I have a bunch of files that are just sitting there and I have no clue how to proceed. Can somebody please enlighten me. Nothing that was said here so far makes any sense to me.
Re: Problems with Encryption in Sab 0.7.14
In Config->Switches you can tell SABnzbd what to do with encrypted posts.
For encrypted posts you indeed need to have a password.
If you don't know how to get those, you might as well delete the jobs.
Usually passwords are distributed through specific NZB indexers and other tracking sites.
For encrypted posts you indeed need to have a password.
If you don't know how to get those, you might as well delete the jobs.
Usually passwords are distributed through specific NZB indexers and other tracking sites.
Re: Problems with Encryption in Sab 0.7.14
Ok thanks Shypike. The thing is some files from the same source and series are not encrypted and some are. I wonder why someone would encrypt some files but not all. It doesn't make sense. There must be a work around.
Re: Problems with Encryption in Sab 0.7.14
It does makes sense.
Posters try to prevent DMCA takedowns and/or want to limit distribution to insiders only.
Posters try to prevent DMCA takedowns and/or want to limit distribution to insiders only.