Hallo forum leden,
Vraagje over Extra PAR2 parameter
Met SABnzbd v1.2.3 (en ouder), had ik onder Extra PAR2 parameters : -t- (forces single core)
Na een upgrade naar SABnzbd 2.1.0 staat de extra PAR2 parameter nog in het sabnzbd.ini file, terwijl Enable MultiPar aangevinkt staat.
Is deze parameter ook van toepassing op MultiPar?
MultiPar & Extra PAR2 parameters
Re: MultiPar & Extra PAR2 parameters
Nee. Voor Multipar zijn andere parameters nodig, daar hebben we op dit moment nog geen wiki pagina voor dus zul je zelf even in de documentatie van Multipar moeten kijken.
Die wiki komt nog.
Maar die nieuwe parameter voer je op dezelfde plek in, dat wel!
Die wiki komt nog.
Maar die nieuwe parameter voer je op dezelfde plek in, dat wel!
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: MultiPar & Extra PAR2 parameters
Dank voor je antwoord, volgens Command_par2j.txt
/lc :
Set this, if you want to set number of using threads on Multi-Core PC,
or want to disable extra feature. (SSE2 is always used.)
The format is "/lc#", # is from 1 to 11 as the number of using threads,
12 to use quarter number of physical Cores,
13 to use half of physical Cores,
14 to use 3/4 number of physical Cores,
15 to use the number of physical Cores (disable Hyper Threading).
You may set additional combinations; +16 to disable SSSE3,
+128 to disable CLMUL, +256 to disable JIT, +512 to disable AVX2,
+32 or +64 (slower device) to enable GPU acceleration.
for example, /lc1 to use single Core, /lc45 to use half Cores and GPU
Extra PAR2 parameters : /lc1
/lc :
Set this, if you want to set number of using threads on Multi-Core PC,
or want to disable extra feature. (SSE2 is always used.)
The format is "/lc#", # is from 1 to 11 as the number of using threads,
12 to use quarter number of physical Cores,
13 to use half of physical Cores,
14 to use 3/4 number of physical Cores,
15 to use the number of physical Cores (disable Hyper Threading).
You may set additional combinations; +16 to disable SSSE3,
+128 to disable CLMUL, +256 to disable JIT, +512 to disable AVX2,
+32 or +64 (slower device) to enable GPU acceleration.
for example, /lc1 to use single Core, /lc45 to use half Cores and GPU
Extra PAR2 parameters : /lc1
Re: MultiPar & Extra PAR2 parameters
Added the extra Wiki info!
https://sabnzbd.org/wiki/configuration/ ... e-multipar
https://sabnzbd.org/wiki/configuration/ ... e-multipar
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: MultiPar & Extra PAR2 parameters
Wiki info ziet er goed