Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Support for the Debian/Ubuntu package, created by JCFP.
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
MeltingPlastic
Newbie
Newbie
Posts: 1
Joined: February 4th, 2015, 12:40 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by MeltingPlastic »

So hopefully this will be an easy one.

I've set everything up on my RPI B+ for Sab, Sickbeard and CP. They all work great and interact with my install of RaspBMC no issues. The only issue I do have is i can't get the service to autostart. I followed everything in the thread and changed the file to "USER=pi" but still no luck. I can start the service using

Code: Select all

sudo service sabnzbdplus start
I'd like to have to not worry about manually SSHing in and starting Sab. Is there anything I may be missing?
deejay
Newbie
Newbie
Posts: 1
Joined: June 17th, 2015, 9:31 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by deejay »

Hi

I recently installed sabnzbd on a raspberry pi using:

sudo apt-get install sabnzbdplus
sabnzbdplus --server 0.0.0.0

It installed version 0.6.15 (I had no choice).

From this starting point what is the easiest way to upgrade to a later version (0.7+)?

Thank you.

PS I tried apt-get upgrade and got this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
sabnzbdplus sabnzbdplus-theme-classic sabnzbdplus-theme-mobile
sabnzbdplus-theme-plush sabnzbdplus-theme-smpl
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.

Any idea why these packages have been "kept back" and what I can do about it?
User avatar
sander
Release Testers
Release Testers
Posts: 8811
Joined: January 22nd, 2008, 2:22 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by sander »

Upgrading SABnzbd on Raspi / Raspbian: see here: http://forums.sabnzbd.org/viewtopic.php?f=16&t=9844
mamudo
Newbie
Newbie
Posts: 2
Joined: June 26th, 2015, 12:17 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by mamudo »

Hi,

I´m new on Raspberry/Sabnzbd and have a question regarding WebUi:

For me everything is working without any problems and I can also reach WebUi, when I start from SSH following command: sabnzbdplus --server 0.0.0.0

So far so good...

But when I close SSH, where I started sabnzbdplus --server 0.0.0.0, then I can´t reach the WebUi

My question is: How can I start the command sabnzbdplus --server 0.0.0.0 on Raspberry automaticly, so that will run in backgroud and I don´t have to start it manually with commandline? Any suggestions?

Thanks,
mamudo O0
User avatar
sander
Release Testers
Release Testers
Posts: 8811
Joined: January 22nd, 2008, 2:22 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by sander »

See http://wiki.sabnzbd.org/install-ubuntu-repo : How to run as a service
mamudo
Newbie
Newbie
Posts: 2
Joined: June 26th, 2015, 12:17 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by mamudo »

Great, thank you sander :) I´ve made it!
EvenChu
Newbie
Newbie
Posts: 1
Joined: July 30th, 2018, 1:12 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by EvenChu »

Hi...i am a new user here. As per my knowledge when a download starts, CPU use increases, then drops, then increase, then drops, and so on. It looks like the process is killed every time the cpu use reaches a certain value, and is automatically restarted. The overall performance of the Pi follows this routine web interface seems unreachable for 30 seconds, then works fine, then slows down.
User avatar
sander
Release Testers
Release Testers
Posts: 8811
Joined: January 22nd, 2008, 2:22 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by sander »

EvenChu wrote: July 30th, 2018, 1:14 pm Hi...i am a new user here. As per my knowledge when a download starts, CPU use increases, then drops, then increase, then drops, and so on. It looks like the process is killed every time the cpu use reaches a certain value, and is automatically restarted. The overall performance of the Pi follows this routine web interface seems unreachable for 30 seconds, then works fine, then slows down.
The Raspi is not a great platform for running SABnzbd; too low CPU.

Anyway ... to improve it:
* set number of newsserver connections to ... 1
* do not run a GUI on the Raspi
bbking67
Newbie
Newbie
Posts: 1
Joined: January 20th, 2022, 7:58 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by bbking67 »

I can't install Sabnzbd on my raspberry Pi with the following error (seems to be a problem with unrar).

The following packages have unmet dependencies:
sabnzbdplus : Depends: unrar but it is not installable or
rar but it is not installable

I have tried numerous thing unsuccessfully so far... is there a version of unrar that i can install from sources? I'm not a linux pro, so any help would be appreciated. some of the older suggestions in this thread do not work for me.

Update: I have successfully installed using a precompiled .deb file found on another forum.
User avatar
sander
Release Testers
Release Testers
Posts: 8811
Joined: January 22nd, 2008, 2:22 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by sander »

bbking67 wrote: January 21st, 2022, 12:17 pm I can't install Sabnzbd on my raspberry Pi with the following error (seems to be a problem with unrar).

The following packages have unmet dependencies:
sabnzbdplus : Depends: unrar but it is not installable or
rar but it is not installable

I have tried numerous thing unsuccessfully so far... is there a version of unrar that i can install from sources? I'm not a linux pro, so any help would be appreciated. some of the older suggestions in this thread do not work for me.

Update: I have successfully installed using a precompiled .deb file found on another forum.
The magic word on Debian is "unrar-nonfree". You have to install that. Better to get help on that on a Raspbian forum. It's quite hard, see for example https://gist.github.com/VadimBrodsky/1f ... d57095a806

You can also compile from source. Not too difficult ... if you understand the below:

Code: Select all

wget https://www.rarlab.com/rar/unrarsrc-6.1.3.tar.gz
tar xvzf unrarsrc-6.1.3.tar.gz
cd unrar
make
./unrar
Then cp into /usr/bin.
Only do this approach if you understand these commands.
User avatar
sander
Release Testers
Release Testers
Posts: 8811
Joined: January 22nd, 2008, 2:22 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by sander »

Ah, I was in a good mood, started up an old Raspi I had lying around, and created a static unrar 6.10 beta3:

See https://www.appelboor.com/dump/unrar/

It works on my Raspberry OS (32bit) and on my 64-bit ARM (Ubuntu), so I expect it works for you. Please give feedback.
GPI83
Newbie
Newbie
Posts: 3
Joined: July 13th, 2022, 5:20 am

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by GPI83 »

Hello Guys,

Trying to stay up to date on Sabnzbd version but I have found conflicting information.

Ask: How to get the latest version and autoupdate Sabnzbd on a Raspberry Pi 4 with Raspian Buster?
Background:
- Current version: sabnzbdplus-2.3.6
- Source List entry: buster main contrib non-free rpi

Please advise
Appreciate your time and insights
User avatar
sander
Release Testers
Release Testers
Posts: 8811
Joined: January 22nd, 2008, 2:22 pm

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by sander »

GPI83 wrote: July 13th, 2022, 5:45 am Hello Guys,

Trying to stay up to date on Sabnzbd version but I have found conflicting information.

Ask: How to get the latest version and autoupdate Sabnzbd on a Raspberry Pi 4 with Raspian Buster?
Background:
- Current version: sabnzbdplus-2.3.6
- Source List entry: buster main contrib non-free rpi

Please advise
Appreciate your time and insights
Maybe the SABnzbd PPA still works for Debian Buster? Have you tried
If not: github or source.
Or ... bigger step ... switch to Armbian 22.05 Jammy as OS on your Raspi4. Nice OS, Ubuntu based, so automatic updates via the SABnzbd PPA.
GPI83
Newbie
Newbie
Posts: 3
Joined: July 13th, 2022, 5:20 am

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by GPI83 »

Thanks for your response. Per this the topic p=60238#p60238 (sorry I'm not allowed to post links), it seems that PPA is no more an option. I have not tried though...
GPI83
Newbie
Newbie
Posts: 3
Joined: July 13th, 2022, 5:20 am

Re: Howto: Installing SABnzbd on Raspberry Pi (Raspbian)

Post by GPI83 »

As it may help others, I did the following:
- In-place Upgrade of Raspian to the latest version (Buster to BullsEye). Not the best approach but didn't want to reinstall due to customization
- Download SABnzbd for linux on SABnzbd and extract the package
- Follow instruction to install required python modules (check SABnzbd help)
- Run SABnzbd via SABnzbd PY

Hope it helps.
Cheers
Post Reply