Hi,
New the form so thank you in advance for the assistance. Sabnzbd has been running flawlessly for years. Today, I feel like a suspect file was downloaded (clicked the wrong nzb and walked away). Noticed it was the wrong file when I came back and just deleted it.
Tried to download the correct one, as well as many others for testing purposes and keep getting fails on downloads - ("Error pop from empty list while running par2"). What is interesting to note is I even tried to download an nzb that was 49 minutes old and it said missing articles.
I am not sure what part of the log files to include here but I know that helps. Anyone able to assist in telling me how to do that?
Thank you.
Error pop from empty list while running par2
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Error pop from empty list while running par2
In SABnzbd's upper right corner, click on the wrench symbol ("Status and interface options"), then click on first tab Status, and there click on "Test download" 1GB ... what is the result?
Re: Error pop from empty list while running par2
When it was downloading, there were 82MB of missing articles. Then it failed after trying to repair.
Re: Error pop from empty list while running par2
MG? I assume you mean MB?
And no error message (like in the subject)?
Well, that is very bad news about your setup: that 1GB download is a reference download. It will never get DMCA'd. So if you can't download that, your setup (local plus newsserver) is in a very bad state.
EDIT maybe start with
* full virusscan (if on Windows)
* uninstall and install of SABnzbd
Re: Error pop from empty list while running par2
I am on a Mac, ran a virus scan and no results. I will go with a reinstall of SABsander wrote: ↑December 4th, 2021, 11:37 amMG? I assume you mean MB?
And no error message (like in the subject)?
Well, that is very bad news about your setup: that 1GB download is a reference download. It will never get DMCA'd. So if you can't download that, your setup (local plus newsserver) is in a very bad state.
EDIT maybe start with
* full virusscan (if on Windows)
* uninstall and install of SABnzbd
Is there anything in the logs that should be looked at first before taking this step?
Re: Error pop from empty list while running par2
I reinstalled SABnzbd and the problem still persists.
Re: Error pop from empty list while running par2
Yes:Is there anything in the logs that should be looked at first
"error" and "traceback"
Re: Error pop from empty list while running par2
Thank you.
Am I looking for lines in the log that begin with "error" and "traceback"? Sorry, new to logs.
There are a lot of these in the logs:
2021-12-04 11:05:14,607::INFO::[assembler:379] Error during inspection of RAR-file /Volumes/Seagate Box/Downloads/incomplete/test_download_1000MB/sometestfile-1000MB.part02.rar
This one too:
2021-12-04 11:23:49,140::DEBUG::[interface:130] Request GET /api from 127.0.0.1 [Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/96.0.4664.55 Safari/537.36] {'mode': 'history', 'search': '', 'failed_only': '0', 'start': '0', 'limit': '10', 'last_history_update': '508', 'output': 'json', 'apikey':<APIKEY>', '_': '1638644647429'}
2021-12-04 11:23:50,032::DEBUG::[downloader:871] Thread [email protected]: Article GdOgFhGqIsBtQfUpEjGaCbWa-1634895063336@nyuu missing (error=430)
Am I looking for lines in the log that begin with "error" and "traceback"? Sorry, new to logs.
There are a lot of these in the logs:
2021-12-04 11:05:14,607::INFO::[assembler:379] Error during inspection of RAR-file /Volumes/Seagate Box/Downloads/incomplete/test_download_1000MB/sometestfile-1000MB.part02.rar
This one too:
2021-12-04 11:23:49,140::DEBUG::[interface:130] Request GET /api from 127.0.0.1 [Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/96.0.4664.55 Safari/537.36] {'mode': 'history', 'search': '', 'failed_only': '0', 'start': '0', 'limit': '10', 'last_history_update': '508', 'output': 'json', 'apikey':<APIKEY>', '_': '1638644647429'}
2021-12-04 11:23:50,032::DEBUG::[downloader:871] Thread [email protected]: Article GdOgFhGqIsBtQfUpEjGaCbWa-1634895063336@nyuu missing (error=430)
Last edited by sacksyboy on December 4th, 2021, 2:31 pm, edited 2 times in total.
Re: Error pop from empty list while running par2
What's /Volumes/Seagate Box/ ?
To rule out disk problems, I would start by setting Temporary Download Folder and Completed Download Folder (so Incomplete and Complete) to your built-in disk, and try a the 1GB test download again.
To rule out disk problems, I would start by setting Temporary Download Folder and Completed Download Folder (so Incomplete and Complete) to your built-in disk, and try a the 1GB test download again.
Re: Error pop from empty list while running par2
That is an external hard drive plugged in via USB to my Mac running SAB.
Am I looking for lines in the log that begin with "error" and "traceback"? Sorry, new to logs.
There are a lot of these in the logs:
2021-12-04 11:05:14,607::INFO::[assembler:379] Error during inspection of RAR-file /Volumes/Seagate Box/Downloads/incomplete/test_download_1000MB/sometestfile-1000MB.part02.rar
This one too:
2021-12-04 11:23:49,140::DEBUG::[interface:130] Request GET /api from 127.0.0.1 [Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/96.0.4664.55 Safari/537.36] {'mode': 'history', 'search': '', 'failed_only': '0', 'start': '0', 'limit': '10', 'last_history_update': '508', 'output': 'json', 'apikey':<APIKEY>', '_': '1638644647429'}
2021-12-04 11:23:50,032::DEBUG::[downloader:871] Thread [email protected]: Article GdOgFhGqIsBtQfUpEjGaCbWa-1634895063336@nyuu missing (error=430)
Just did another 1GB test file and found tracebacks:
2021-12-04 11:15:46,728::DEBUG::[assembler:380] Traceback:
Traceback (most recent call last):
File "sabnzbd/assembler.py", line 302, in check_encrypted_and_unwanted_files
File "sabnzbd/utils/rarfile.py", line 708, in __init__
File "sabnzbd/utils/rarfile.py", line 917, in _parse
File "sabnzbd/utils/rarfile.py", line 1028, in parse
File "sabnzbd/utils/rarfile.py", line 1052, in _parse_real
File "sabnzbd/utils/rarfile.py", line 1134, in _parse_header
File "sabnzbd/utils/rarfile.py", line 1675, in _parse_block_header
File "sabnzbd/utils/rarfile.py", line 2644, in load_le32
sabnzbd.utils.rarfile.BadRarFile: cannot load le32
2021-12-04 11:15:46,906::DEBUG::[interface:130] Request GET /api from 127.0.0.1 [Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/96.0.4664.55 Safari/537.36] {'mode': 'queue', 'search': '', 'start': '0', 'limit': '20', 'output': 'json', 'apikey':<APIKEY>', '_': '1638644646613'}
There is lots of them but they all look the same.
Re: Error pop from empty list while running par2
I pointed the download folders to my local Mac HD. Download failed again.
Here is the errors:
2021-12-04 11:40:38,665::DEBUG::[downloader:871] Thread [email protected]: Article GdOgFhGqIsBtQfUpEjGaCbWa-1634895063336@nyuu missing (error=430)
2021-12-04 11:40:38,666::INFO::[nzbstuff:262] Article GdOgFhGqIsBtQfUpEjGaCbWa-1634895063336@nyuu unavailable on all servers, discarding
2021-12-04 11:40:25,368::DEBUG::[downloader:871] Thread [email protected]: Article JeJxIcUoDoLhDgSxVnEuFiVm-1634895056910@nyuu missing (error=430)
2021-12-04 11:40:12,046::INFO::[assembler:379] Error during inspection of RAR-file /Volumes/Macintosh HD/Users/grant/Downloads/incomplete/test_download_1000MB/sometestfile-1000MB.part67.rar
Here is the traceback:
2021-12-04 11:40:12,046::DEBUG::[assembler:380] Traceback:
Traceback (most recent call last):
File "sabnzbd/assembler.py", line 302, in check_encrypted_and_unwanted_files
File "sabnzbd/utils/rarfile.py", line 708, in __init__
File "sabnzbd/utils/rarfile.py", line 917, in _parse
File "sabnzbd/utils/rarfile.py", line 1028, in parse
File "sabnzbd/utils/rarfile.py", line 1052, in _parse_real
File "sabnzbd/utils/rarfile.py", line 1134, in _parse_header
File "sabnzbd/utils/rarfile.py", line 1675, in _parse_block_header
File "sabnzbd/utils/rarfile.py", line 2644, in load_le32
sabnzbd.utils.rarfile.BadRarFile: cannot load le32
Re: Error pop from empty list while running par2
Now "sabnzbd.utils.rarfile.BadRarFile: cannot load le32"? Brrrr.
Do you have the feature on Unwanted extensions or Encrypted downloads? If so, can you turn it off?
Which version of SABnzbd, on which CPU type (Intel or M1)?
Do you have the feature on Unwanted extensions or Encrypted downloads? If so, can you turn it off?
Which version of SABnzbd, on which CPU type (Intel or M1)?
Re: Error pop from empty list while running par2
Which usenet server are you using (specific address and port)? It could be a Supernews problem. Try getting the free 25 GB from xsusenet.com and add it as a secondary server. I would also run a memcheck program, if there is such a thing for Mac.
Re: Error pop from empty list while running par2
No unwanted extensions in the SAB configuration (I am assuming you mean things like .bat, .exe etc).
No encrypted downloads and the config is set to pause for "Action when encrypted RAR is downloaded".
SABnzbd version: 3.4.2
Mac M1 chip
Re: Error pop from empty list while running par2
news.supernews.com
port is 563
Used the Mac Disk Utility feature and no errors detected with memory.