Windows 10E
Sabnzbd ver: 1.2.2 [555d841] (running as windows server sabnzbd-servce.exe)
Python 2.7.13
So I've had Sabnzbd running on my actual ip x.x.x.20 , however, that IP how now changed, so I went to the webui and tried to change it to both LOCALHOST, 0.0.0.0, and 127.0.0.1, but no matter what I do, after I restart, it goes back to x.20?
I've also tried to edit the sabnzbd.ini file directly, but again, as soon as the application restarts, it changes back.
Is this by design or am I doing something wrong?
Why can't I set HOST to LOCALHOST or 127.0.0.1?
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
seanvree81
- Newbie
- Posts: 49
- Joined: February 25th, 2016, 9:55 pm
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
Read the manual:
https://sabnzbd.org/wiki/advanced/sabnz ... ws-service
Specifically the 'Specifying additional options' section.
https://sabnzbd.org/wiki/advanced/sabnz ... ws-service
Specifically the 'Specifying additional options' section.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
seanvree81
- Newbie
- Posts: 49
- Joined: February 25th, 2016, 9:55 pm
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
Got it! THANKS!safihre wrote:Read the manual:
https://sabnzbd.org/wiki/advanced/sabnz ... ws-service
Specifically the 'Specifying additional options' section.
-
seanvree81
- Newbie
- Posts: 49
- Joined: February 25th, 2016, 9:55 pm
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
Hey @Safihre ,
I changed my listening host to 0.0.0.0, but now when I have HTTPs enabled, the service crashes. If I disable the service, then manually disable HTTPS in the sabnzbd.ini file, then the service will launch but without SSL.
Running on:
Windows 10E
Sabnzbd ver: 1.2.2 [555d841]
Python: 2.7.13 (v2.7.13:a06454b1afa1, Dec 17 2016, 20:42:59
Any idea what's up?
Here's the logs:
2017-02-28 04:07:02,369::INFO::[SABnzbd:1185] SABnzbd-service.exe-1.2.2 (rev=555d8418e72214673ebce774f1471852bd74c7d3)
2017-02-28 04:07:02,369::INFO::[SABnzbd:1186] Full executable path = C:\Program Files (x86)\SABnzbd\SABnzbd-service.exe
2017-02-28 04:07:02,371::INFO::[SABnzbd:1194] Platform=Windows-10-10.0.14393 (=Vista+ x64) Class=nt
2017-02-28 04:07:02,371::INFO::[SABnzbd:1199] Python-version = 2.7.13 (v2.7.13:a06454b1afa1, Dec 17 2016, 20:42:59) [MSC v.1500 32 bit (Intel)]
2017-02-28 04:07:02,371::INFO::[SABnzbd:1200] Arguments =
2017-02-28 04:07:02,371::INFO::[SABnzbd:1202] Preferred encoding = cp1252
2017-02-28 04:07:02,371::INFO::[SABnzbd:1250] Read INI file c:\sabnzbd\sabnzbd.ini
2017-02-28 04:07:02,374::INFO::[__init__:993] Loading data for rss_data.sab from c:\sabnzbd\admin\rss_data.sab
2017-02-28 04:07:02,375::INFO::[__init__:993] Loading data for totals10.sab from c:\sabnzbd\admin\totals10.sab
2017-02-28 04:07:02,375::INFO::[postproc:92] Loading postproc queue
2017-02-28 04:07:02,375::INFO::[__init__:993] Loading data for postproc2.sab from c:\sabnzbd\admin\postproc2.sab
2017-02-28 04:07:02,375::INFO::[__init__:993] Loading data for queue10.sab from c:\sabnzbd\admin\queue10.sab
2017-02-28 04:07:02,377::INFO::[__init__:993] Loading data for watched_data2.sab from c:\sabnzbd\admin\watched_data2.sab
2017-02-28 04:07:02,377::INFO::[__init__:993] Loading data for Rating.sab from c:\sabnzbd\admin\Rating.sab
2017-02-28 04:07:02,384::INFO::[scheduler:190] Setting schedule for midnight BPS reset
2017-02-28 04:07:02,384::INFO::[__init__:353] All processes started
2017-02-28 04:07:02,384::INFO::[SABnzbd:304] Web dir is C:\Program Files (x86)\SABnzbd\interfaces\Glitter
2017-02-28 04:07:02,384::INFO::[SABnzbd:304] Web dir is C:\Program Files (x86)\SABnzbd\interfaces\smpl
2017-02-28 04:07:02,385::INFO::[SABnzbd:304] Web dir is C:\Program Files (x86)\SABnzbd\interfaces\Config
2017-02-28 04:07:02,398::INFO::[SABnzbd:432] _yenc module... found!
2017-02-28 04:07:02,401::INFO::[SABnzbd:437] Cryptography module (v1.7.1)... found!
2017-02-28 04:07:02,401::INFO::[SABnzbd:442] par2 binary... found (C:\Program Files (x86)\SABnzbd\win\par2\x64\par2.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:447] par2cmdline binary... found (C:\Program Files (x86)\SABnzbd\win\par2\par2cmdline.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:450] UNRAR binary... found (C:\Program Files (x86)\SABnzbd\win\unrar\x64\UnRAR.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:456] unzip binary... found (C:\Program Files (x86)\SABnzbd\win\unzip\unzip.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:461] 7za binary... found (C:\Program Files (x86)\SABnzbd\win\7zip\7za.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:1304] SSL version OpenSSL 1.0.2j 26 Sep 2016
2017-02-28 04:07:02,417::INFO::[SABnzbd:1305] SSL supported protocols ['TLS v1.2', 'TLS v1.1', 'TLS v1', 'SSL v3']
2017-02-28 04:07:02,417::INFO::[SABnzbd:1444] Starting web-interface on 0.0.0.0:38081
2017-02-28 04:07:02,420::INFO::[_cplogging:219] [28/Feb/2017:04:07:02] ENGINE Bus STARTING
2017-02-28 04:07:02,424::INFO::[_cplogging:219] [28/Feb/2017:04:07:02] ENGINE Started monitor thread '_TimeoutMonitor'.
2017-02-28 04:07:03,398::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Serving on https://0.0.0.0:38081
2017-02-28 04:07:03,601::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Serving on http://::1:38080
2017-02-28 04:07:03,602::ERROR::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Error in 'start' listener <bound method Server.start of <cherrypy._cpserver.Server object at 0x02803C90>>
Traceback (most recent call last):
File "cherrypy\process\wspbus.pyo", line 207, in publish
File "cherrypy\_cpserver.pyo", line 167, in start
File "cherrypy\_cpserver.pyo", line 158, in httpserver_from_self
File "cherrypy\_cpwsgi_server.pyo", line 60, in __init__
File "cherrypy\wsgiserver\__init__.pyo", line 2260, in get_ssl_adapter_class
ImportError: No module named ssl_pyopenssl
2017-02-28 04:07:03,904::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Serving on http://0.0.0.0:38080
2017-02-28 04:07:03,905::ERROR::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Shutting down due to error in start listener:
Traceback (most recent call last):
File "cherrypy\process\wspbus.pyo", line 245, in start
File "cherrypy\process\wspbus.pyo", line 225, in publish
ChannelFailures: ImportError('No module named ssl_pyopenssl',)
2017-02-28 04:07:03,905::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Bus STOPPING
2017-02-28 04:07:03,907::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE HTTP Server None already shut down
2017-02-28 04:07:09,992::INFO::[_cplogging:219] [28/Feb/2017:04:07:09] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 38080)) shut down
2017-02-28 04:07:10,095::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('::1', 38080)) shut down
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 38081)) shut down
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Stopped thread '_TimeoutMonitor'.
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Bus STOPPED
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Bus EXITING
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Bus EXITED
I changed my listening host to 0.0.0.0, but now when I have HTTPs enabled, the service crashes. If I disable the service, then manually disable HTTPS in the sabnzbd.ini file, then the service will launch but without SSL.
Running on:
Windows 10E
Sabnzbd ver: 1.2.2 [555d841]
Python: 2.7.13 (v2.7.13:a06454b1afa1, Dec 17 2016, 20:42:59
Any idea what's up?
Here's the logs:
2017-02-28 04:07:02,369::INFO::[SABnzbd:1185] SABnzbd-service.exe-1.2.2 (rev=555d8418e72214673ebce774f1471852bd74c7d3)
2017-02-28 04:07:02,369::INFO::[SABnzbd:1186] Full executable path = C:\Program Files (x86)\SABnzbd\SABnzbd-service.exe
2017-02-28 04:07:02,371::INFO::[SABnzbd:1194] Platform=Windows-10-10.0.14393 (=Vista+ x64) Class=nt
2017-02-28 04:07:02,371::INFO::[SABnzbd:1199] Python-version = 2.7.13 (v2.7.13:a06454b1afa1, Dec 17 2016, 20:42:59) [MSC v.1500 32 bit (Intel)]
2017-02-28 04:07:02,371::INFO::[SABnzbd:1200] Arguments =
2017-02-28 04:07:02,371::INFO::[SABnzbd:1202] Preferred encoding = cp1252
2017-02-28 04:07:02,371::INFO::[SABnzbd:1250] Read INI file c:\sabnzbd\sabnzbd.ini
2017-02-28 04:07:02,374::INFO::[__init__:993] Loading data for rss_data.sab from c:\sabnzbd\admin\rss_data.sab
2017-02-28 04:07:02,375::INFO::[__init__:993] Loading data for totals10.sab from c:\sabnzbd\admin\totals10.sab
2017-02-28 04:07:02,375::INFO::[postproc:92] Loading postproc queue
2017-02-28 04:07:02,375::INFO::[__init__:993] Loading data for postproc2.sab from c:\sabnzbd\admin\postproc2.sab
2017-02-28 04:07:02,375::INFO::[__init__:993] Loading data for queue10.sab from c:\sabnzbd\admin\queue10.sab
2017-02-28 04:07:02,377::INFO::[__init__:993] Loading data for watched_data2.sab from c:\sabnzbd\admin\watched_data2.sab
2017-02-28 04:07:02,377::INFO::[__init__:993] Loading data for Rating.sab from c:\sabnzbd\admin\Rating.sab
2017-02-28 04:07:02,384::INFO::[scheduler:190] Setting schedule for midnight BPS reset
2017-02-28 04:07:02,384::INFO::[__init__:353] All processes started
2017-02-28 04:07:02,384::INFO::[SABnzbd:304] Web dir is C:\Program Files (x86)\SABnzbd\interfaces\Glitter
2017-02-28 04:07:02,384::INFO::[SABnzbd:304] Web dir is C:\Program Files (x86)\SABnzbd\interfaces\smpl
2017-02-28 04:07:02,385::INFO::[SABnzbd:304] Web dir is C:\Program Files (x86)\SABnzbd\interfaces\Config
2017-02-28 04:07:02,398::INFO::[SABnzbd:432] _yenc module... found!
2017-02-28 04:07:02,401::INFO::[SABnzbd:437] Cryptography module (v1.7.1)... found!
2017-02-28 04:07:02,401::INFO::[SABnzbd:442] par2 binary... found (C:\Program Files (x86)\SABnzbd\win\par2\x64\par2.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:447] par2cmdline binary... found (C:\Program Files (x86)\SABnzbd\win\par2\par2cmdline.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:450] UNRAR binary... found (C:\Program Files (x86)\SABnzbd\win\unrar\x64\UnRAR.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:456] unzip binary... found (C:\Program Files (x86)\SABnzbd\win\unzip\unzip.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:461] 7za binary... found (C:\Program Files (x86)\SABnzbd\win\7zip\7za.exe)
2017-02-28 04:07:02,401::INFO::[SABnzbd:1304] SSL version OpenSSL 1.0.2j 26 Sep 2016
2017-02-28 04:07:02,417::INFO::[SABnzbd:1305] SSL supported protocols ['TLS v1.2', 'TLS v1.1', 'TLS v1', 'SSL v3']
2017-02-28 04:07:02,417::INFO::[SABnzbd:1444] Starting web-interface on 0.0.0.0:38081
2017-02-28 04:07:02,420::INFO::[_cplogging:219] [28/Feb/2017:04:07:02] ENGINE Bus STARTING
2017-02-28 04:07:02,424::INFO::[_cplogging:219] [28/Feb/2017:04:07:02] ENGINE Started monitor thread '_TimeoutMonitor'.
2017-02-28 04:07:03,398::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Serving on https://0.0.0.0:38081
2017-02-28 04:07:03,601::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Serving on http://::1:38080
2017-02-28 04:07:03,602::ERROR::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Error in 'start' listener <bound method Server.start of <cherrypy._cpserver.Server object at 0x02803C90>>
Traceback (most recent call last):
File "cherrypy\process\wspbus.pyo", line 207, in publish
File "cherrypy\_cpserver.pyo", line 167, in start
File "cherrypy\_cpserver.pyo", line 158, in httpserver_from_self
File "cherrypy\_cpwsgi_server.pyo", line 60, in __init__
File "cherrypy\wsgiserver\__init__.pyo", line 2260, in get_ssl_adapter_class
ImportError: No module named ssl_pyopenssl
2017-02-28 04:07:03,904::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Serving on http://0.0.0.0:38080
2017-02-28 04:07:03,905::ERROR::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Shutting down due to error in start listener:
Traceback (most recent call last):
File "cherrypy\process\wspbus.pyo", line 245, in start
File "cherrypy\process\wspbus.pyo", line 225, in publish
ChannelFailures: ImportError('No module named ssl_pyopenssl',)
2017-02-28 04:07:03,905::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE Bus STOPPING
2017-02-28 04:07:03,907::INFO::[_cplogging:219] [28/Feb/2017:04:07:03] ENGINE HTTP Server None already shut down
2017-02-28 04:07:09,992::INFO::[_cplogging:219] [28/Feb/2017:04:07:09] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 38080)) shut down
2017-02-28 04:07:10,095::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('::1', 38080)) shut down
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE HTTP Server cherrypy._cpwsgi_server.CPWSGIServer(('0.0.0.0', 38081)) shut down
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Stopped thread '_TimeoutMonitor'.
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Bus STOPPED
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Bus EXITING
2017-02-28 04:07:10,298::INFO::[_cplogging:219] [28/Feb/2017:04:07:10] ENGINE Bus EXITED
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
Thats strange, for some reason it's ignoring us telling it not to use PyOpenSSL.
Will put this on the bug list, have to investigate.
Will put this on the bug list, have to investigate.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
Actually, can you try for me in Config > Specials, verify that ipv6_hosting is turned off? (unchecked)
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
@safihre: FWIW same error message in june 2016 on OSX, with a patch by @shypike: https://forums.sabnzbd.org/viewtopic.ph ... 68#p106795
-
seanvree81
- Newbie
- Posts: 49
- Joined: February 25th, 2016, 9:55 pm
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
@safihire,safihre wrote:Actually, can you try for me in Config > Specials, verify that ipv6_hosting is turned off? (unchecked)
It's actually turned on (checked) but it's always worked before?
Should I have that unchecked?
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
Try for now.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
seanvree81
- Newbie
- Posts: 49
- Joined: February 25th, 2016, 9:55 pm
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
is there any update to this? Is this a bug?safihre wrote:Try for now.
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
We haven't had any other reports about it..
I also don't have a proper IPv6 setup to test, which makes it difficult..
I also don't have a proper IPv6 setup to test, which makes it difficult..
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Why can't I set HOST to LOCALHOST or 127.0.0.1?
We found the problem.
Should be fixed in 1.2.3.
Should be fixed in 1.2.3.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate