Hi all,
I hope someone could help me.
I run sabnzbd 2.3.5 on an Arch linux machine. With the latest arch patches, sabnzd does not connect to the usenet server anymore. The error message says:
[SSL] malloc failure (_ssl.c:2214)
I suspect that something with openssl on the arch machine is wrong, but I'm unable to find the error. Any ideas, thoughts or directions ? Many thanks !
cheers,
FB
[SSL] malloc failure (_ssl.c:2214)
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
- Newbie
- Posts: 5
- Joined: November 26th, 2018, 12:44 pm
Re: [SSL] malloc failure (_ssl.c:2214)
There must be more lines of info in sabnzbd.log and/or console, certainly before this message. Can you post that?
Re: [SSL] malloc failure (_ssl.c:2214)
This is inside the C-part of Python/OpenSSL though.
Is it possible for you to re-install whole Python?
Is it possible for you to re-install whole Python?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
- Newbie
- Posts: 5
- Joined: November 26th, 2018, 12:44 pm
Re: [SSL] malloc failure (_ssl.c:2214)
there's not much in sabnzbd.log:
Code: Select all
2018-11-27 18:15:08,293::INFO::[downloader:781] Thread 6@reader usenetbucket com: failed to initialize
2018-11-27 18:15:08,293::INFO::[downloader:490] 7@reader usenetbucket com: Initiating connection
2018-11-27 18:15:08,294::ERROR::[downloader:493] Fehler 7@reader usenetbucket com zu initialisieren, aus folgendem Grund:
[SSL] malloc failure (_ssl.c:2214)
2018-11-27 18:15:08,294::INFO::[downloader:781] Thread 7@reader usenetbucket com: failed to initialize
2018-11-27 18:15:08,294::INFO::[downloader:490] 8@reader usenetbucket com: Initiating connection
2018-11-27 18:15:08,294::ERROR::[downloader:493] Fehler 8@reader usenetbucket com zu initialisieren, aus folgendem Grund:
[SSL] malloc failure (_ssl.c:2214)
2018-11-27 18:15:08,294::INFO::[downloader:781] Thread 8@reader usenetbucket com: failed to initialize
2018-11-27 18:15:08,294::INFO::[downloader:490] 9@reader usenetbucket com: Initiating connection
2018-11-27 18:15:08,294::ERROR::[downloader:493] Fehler 9@reader usenetbucket com zu initialisieren, aus folgendem Grund:
[SSL] malloc failure (_ssl.c:2214)
-
- Newbie
- Posts: 5
- Joined: November 26th, 2018, 12:44 pm
Re: [SSL] malloc failure (_ssl.c:2214)
In the meantime: does it also happen with another newsserver, for example news.eweka.nl or news.vipernews.com ?
-
- Newbie
- Posts: 5
- Joined: November 26th, 2018, 12:44 pm
Re: [SSL] malloc failure (_ssl.c:2214)
Thanks safihre ! re-installing python did the trick.
A simple
was enough !
Many thanks for the quick help !
cheers FB
A simple
Code: Select all
pacman -S python python2
Many thanks for the quick help !
cheers FB
-
- Newbie
- Posts: 5
- Joined: November 26th, 2018, 12:44 pm
Re: [SSL] malloc failure (_ssl.c:2214)
and of course also thanks sander for taking care !
cheers FB
cheers FB