Hi, I have SAB set up in docker with Sonarr and Radarr. Everything is working fine but when I start downloading stuff with SAB it works fine for a bit giving me around 35MB/s but after a bit, it plummets to <1mb/s and stays there until I reset the whole Synology. Then after a while, it happens again. I feel like I should not need to reset the NAS a few times a day.
My internet is 300mb/s.
My modem is 1000+ Mbps capable.
My Synology is wired directly in.
Any advice would be appreciated.
SABnzbd slows downloads after some time.
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
- Newbie
- Posts: 2
- Joined: November 26th, 2019, 3:38 pm
Re: SABnzbd slows downloads after some time.
I think your Synology might not be powerfull enough. Did you check all the speed-performance settings?
https://sabnzbd.org/wiki/advanced/highspeed-downloading
https://sabnzbd.org/wiki/advanced/highspeed-downloading
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate