Page 1 of 1

D/L speed caps out at 2.5 MB/s

Posted: May 9th, 2020, 12:51 pm
by Rado001
Hi,

I have been using sabnzbd for about 10-ish years now. I have just reinstalled the latest version and re-set up the server config. The speed seems to be capped at 2.5 MD/s.

At first it jumps to about 2.9, but then it scales back down to 2.5.
In the past, I used to have speeds up to about 60-70 MB/s.

My wi-fi speed test just gave me 413 mbps d/l speed.

I also opened the 8080 port on my modem.

Download folder speed is 103.5 MB/s.

My sabnzbd general settings are:

Maximum line speed: 70 MB/s
Percentage of line speed: 100%
Article Cache Limit: 1G
NO SSL

Sabnzbd server settings:

Connections: 10
Priority: highest
NO SSL

What can be causing the speed limit?

Re: D/L speed caps out at 2.5 MB/s

Posted: May 12th, 2020, 6:17 am
by safihre
Have you tried to download the test-download in Status and Interface settings?
Can you run the tests also there for disk-speed etc?

Re: D/L speed caps out at 2.5 MB/s

Posted: May 13th, 2020, 7:50 am
by Rado001
@safihre

System performance (Pystone): 210046
Download folder speed33.5 MB/s
Complete folder speed46.2 MB/s

Is this what you were asking for?

Re: D/L speed caps out at 2.5 MB/s

Posted: May 14th, 2020, 10:41 pm
by Rado001
Is it possible my ISP is throttling my traffic?

Re: D/L speed caps out at 2.5 MB/s

Posted: May 20th, 2020, 4:19 am
by safihre
Could be the case! What happens if you use SSL?
If you use fast.com, what speed do you get there? Mind that it's written in MBps and not MB/s, so you have to devide the result by 8 to get MB/s.