Help a noob. All configurations appear correct but data is not flowing.

Get help with all aspects of SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Post Reply
mellofello808
Newbie
Newbie
Posts: 4
Joined: August 23rd, 2009, 8:22 pm

Help a noob. All configurations appear correct but data is not flowing.

Post by mellofello808 »

Hi this is my first time setting up a usenet account so if my problem is glaringly obvious then I apologize. Any advice would be greatly appreciated.

Here is my predicament.

I signed up for Astraweb today. I went to the user details copy and pasted all the server configurations over from Astraweb, tried all four recomended ports, and triple checked my user name and password. For some reason all of the Nzb files I downloaded are just sitting in my queue and not transmitting. I'm not familiar with SABnzb so I'm not sure where to begin to look for where my error is coming from. There are no obvious error messages.

System:OSX Leopard

Browser:Firefox 3.5


Do you have any ideas on how to isolate the problem in Sabnzb  or perhaps test my connection in Astraweb?
Last edited by mellofello808 on August 24th, 2009, 4:39 am, edited 1 time in total.
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by shypike »

Are you sure you entered no spaces at the end or beginning of the username and password?\
You should not flag the server as a "backup" server!
SABnzbd is not paused?
There are jobs visible in the queue?
mellofello808
Newbie
Newbie
Posts: 4
Joined: August 23rd, 2009, 8:22 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by mellofello808 »

Thanks for the reply

I went back to the settings and re-entered my user name and password, and also verified that the backup server box was not checked.

Data is still not transferring. I have 2 files in the queue one is a couple weeks old, and one is less then a week.

In reading through the other posts I see a reference to pinging the server. How do I go about doing that?
User avatar
switch
Moderator
Moderator
Posts: 1380
Joined: January 17th, 2008, 3:55 pm
Location: UK

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by switch »

Do you have SSL checked? If so is the server and port you entered SSL friendly?

How many connections do you have set, are there any warnings on the connection page?
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by shypike »

mellofello808 wrote: In reading through the other posts I see a reference to pinging the server. How do I go about doing that?
Open a terminal window and type:
ping PUT-ASTRA-SERVER-ADDRESS-HERE
mellofello808
Newbie
Newbie
Posts: 4
Joined: August 23rd, 2009, 8:22 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by mellofello808 »

Thank you guys for your responses

I did a ping in terminal and got...

PING news.astraweb.com (207.246.207.160): 56 data bytes
64 bytes from 207.246.207.160: icmp_seq=0 ttl=55 time=95.380 ms
64 bytes from 207.246.207.160: icmp_seq=1 ttl=55 time=95.674 ms
64 bytes from 207.246.207.160: icmp_seq=2 ttl=55 time=95.582 ms
64 bytes from 207.246.207.160: icmp_seq=3 ttl=55 time=94.888 ms
64 bytes from 207.246.207.160: icmp_seq=4 ttl=55 time=96.405 ms

this sequence continued on to infinity

I do not have SSL enabled in my prefs, but I have tried the SSL server ports with the same results.

Here is a screengrab of my current configuration

Image

Also here is a screengrab of my account info with astraweb

Image

It seems to be able to ping the server without issue. I turned off my peer guardian software, and I don't have a firewall aside from whatever is preinstalled on the airport extreme. Do I need to do any port forwarding to get it to transmit?
User avatar
shypike
Administrator
Administrator
Posts: 19774
Joined: January 18th, 2008, 12:49 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by shypike »

Have you tried any of the other server addresses and ports?
Don't know if you are in Europe or the US, you need a different server per continent.

Otherwise try this address:
news.giganews.com 119
or
news-europe.giganews.com 119

You should at least get a error report from these servers.
mellofello808
Newbie
Newbie
Posts: 4
Joined: August 23rd, 2009, 8:22 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by mellofello808 »

I tried to change to the us.astraweb.com and tried port 119, but still not transmitting.

If I enter in a bogus server then I do get an error message but for some reason it wont transmit with the accepted server ???
parasky
Newbie
Newbie
Posts: 1
Joined: August 25th, 2009, 3:43 pm

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by parasky »

Did you ever figure this out?  The exact same thing is happening to me.
User avatar
interfacelift
Jr. Member
Jr. Member
Posts: 75
Joined: June 19th, 2008, 12:58 am
Location: Coruscant

Re: Help a noob. All configurations appear correct but data is not flowing.

Post by interfacelift »

Have you tried port 119? I also use astraweb, but I'm on one of their plans that has SSL.

Here's my settings anyway:
secure.news.astraweb.com
port 563
10 connections
ssl enabled
Post Reply