Hi me again :]
Little problem with the updated tool.
I queue the 22 episodes of a certain series. They are in independent nzbs this time.
It downloads fine to the end of the queue except for eps 4 and 11 which stay downloaded but still in the queue. No warnings no errors.
I check the incomplete folder and run the par file by hand.
In the case of ep 4 quickpar says r10 is incomplete and I need 1 more block which I don't have. But when I go to the complete folder, there it is the ep unpacked, right size but wrong crc.
In the case of file 11, it is unpacked right size right crc. I have no idea what's the problem with ep 11.
On the positive side the unpacking of multiple files in the same nzb is going a lot faster now . Thanks!
Version 2.2.0
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Version 2.2.0
Can you check which files are still left for these jobs? By clicking on the folder-icon when you hover over the job.
Do they continue when you pause and unpause the separate download?
How many servers do you have?
What OS are you on?
Do they continue when you pause and unpause the separate download?
How many servers do you have?
What OS are you on?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
- Newbie
- Posts: 16
- Joined: May 10th, 2017, 8:42 am
Re: Version 2.2.0
That was fast
K I checked and it hadn't downloaded any of the par files except the small one.
I paused and unpaused and that did the trick. All the files are now unpacked and fine.
I have 2 servers but it didn't need to use the second one.
Windows 10
K I checked and it hadn't downloaded any of the par files except the small one.
I paused and unpaused and that did the trick. All the files are now unpacked and fine.
I have 2 servers but it didn't need to use the second one.
Windows 10
Re: Version 2.2.0
Yeah we have 2.2.0 just out so want to be on top of things, especially since other users report this problem too.
Are you on macOS or Windows by any chance?
Are you on macOS or Windows by any chance?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Version 2.2.0
Alright, could you instead install this version:
https://github.com/sabnzbd/sabbuild/rel ... ti-stall-1
It has implemented an anti-stall method, which checks every 90 seconds if something is wrong.
Could you use this and in case it stalls ever again, report it?
https://github.com/sabnzbd/sabbuild/rel ... ti-stall-1
It has implemented an anti-stall method, which checks every 90 seconds if something is wrong.
Could you use this and in case it stalls ever again, report it?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Version 2.2.0
I released a new version, 2.2.1RC1 with only the small change that should make sure it does not get stuck.
Could you try this one so I know to release it to the big public in a few days?
https://sabnzbd.org/downloads.html
Could you try this one so I know to release it to the big public in a few days?
https://sabnzbd.org/downloads.html
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
- Newbie
- Posts: 16
- Joined: May 10th, 2017, 8:42 am
Re: Version 2.2.0
Oh
K
The one I got yesterday with your link was named 2.3.0 [8aa57bf] and so far it's working fine.
K I'll try 2.2.1
Thanks
K
The one I got yesterday with your link was named 2.3.0 [8aa57bf] and so far it's working fine.
K I'll try 2.2.1
Thanks
-
- Newbie
- Posts: 16
- Joined: May 10th, 2017, 8:42 am
Re: Version 2.2.0
K little update for 2.2.1:
All the files I've downloaded today contained only rars, no par files or sfv.
Out of around 30 nzbs, 5 times i've got a "Aborted, cannot be completed - 1 article were malformed" Download stops for the file and it goes to "history"
Status Failed
Size 2.0 GB
Category tv
PathC:\Users\...\incomplete\....S06E01.....
Source.........................S06E01.................nzb
Download Downloaded in 6 mins 55 seconds at an average of 5.0 MB/s
Age: 686d
1 articles were malformed
Aborted, cannot be completed - https://sabnzbd.org/not-complete
I hit "retry" and I see it had stopped half way thru. It resumes downloading
Repair[.................S06E01....................] No par2 sets
Trying RAR-based verification
RAR files verified successfully
Unpack[.......................S06E01.........................] Unpacked 1 files/folders in 1 min 1 sec
... and all is fine.
::
Is it unpacking no matter what? I don't have a crc code to check these files.
All the files I've downloaded today contained only rars, no par files or sfv.
Out of around 30 nzbs, 5 times i've got a "Aborted, cannot be completed - 1 article were malformed" Download stops for the file and it goes to "history"
Status Failed
Size 2.0 GB
Category tv
PathC:\Users\...\incomplete\....S06E01.....
Source.........................S06E01.................nzb
Download Downloaded in 6 mins 55 seconds at an average of 5.0 MB/s
Age: 686d
1 articles were malformed
Aborted, cannot be completed - https://sabnzbd.org/not-complete
I hit "retry" and I see it had stopped half way thru. It resumes downloading
Repair[.................S06E01....................] No par2 sets
Trying RAR-based verification
RAR files verified successfully
Unpack[.......................S06E01.........................] Unpacked 1 files/folders in 1 min 1 sec
... and all is fine.
::
Is it unpacking no matter what? I don't have a crc code to check these files.
Re: Version 2.2.0
Maybe you can watch them videos and see if they work from start to finish?
This behavior is not new for 2.x.x, has been like that since maybe even before 1.0.0.
If you add the download again (not retry, just adding the NZB again), does it say 1 malformed again?
This behavior is not new for 2.x.x, has been like that since maybe even before 1.0.0.
If you add the download again (not retry, just adding the NZB again), does it say 1 malformed again?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
- Newbie
- Posts: 16
- Joined: May 10th, 2017, 8:42 am
Re: Version 2.2.0
I readded 2 of the nzbs again and it stoped downloading in the same place.
I readded too one nzb with problems from version 2.2.0 (post #1) and it downloaded fine. No stall problem.
I readded too one nzb with problems from version 2.2.0 (post #1) and it downloaded fine. No stall problem.
Re: Version 2.2.0
I think maybe it's better to allow up to 5 bad articles and just hope it unpacks fine.
5 is the same number we use before we abort Direct Unpack.
5 is the same number we use before we abort Direct Unpack.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
- Newbie
- Posts: 16
- Joined: May 10th, 2017, 8:42 am
Re: Version 2.2.0
I got
Loading \\?\C:\Users\.............\incomplete\..............x2\__ADMIN__\SABnzbd_article_bcgg7r failed
whatever that means.
It was a pack of files and they unpacked fine.
Loading \\?\C:\Users\.............\incomplete\..............x2\__ADMIN__\SABnzbd_article_bcgg7r failed
whatever that means.
It was a pack of files and they unpacked fine.
Re: Version 2.2.0
Could you check in your log if below the line where the error is, there is a traceback what went wrong?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
- Newbie
- Posts: 16
- Joined: May 10th, 2017, 8:42 am
Re: Version 2.2.0
I can't find that specific line in the log.
The only mention of an error is at the end of the log:
... if this makes any sense
The only mention of an error is at the end of the log:
Code: Select all
[ncenter]
ncenter_prio_download = 0
ncenter_prio_warning = 0
ncenter_prio_new_login = 0
ncenter_prio_queue_done = 1
ncenter_prio_startup = 1
ncenter_prio_failed = 1
ncenter_prio_disk_full = 1
ncenter_prio_error = 0
ncenter_enable = 0
ncenter_prio_complete = 1
ncenter_prio_pp = 0
ncenter_prio_other = 0
ncenter_cats = *,
[nscript]
nscript_prio_warning = 0
nscript_prio_complete = 1
nscript_prio_other = 0
nscript_prio_queue_done = 1
nscript_prio_failed = 1
nscript_prio_pp = 0
nscript_prio_new_login = 0
nscript_script = ""
nscript_prio_download = 0
nscript_prio_error = 0
nscript_prio_startup = 1
nscript_parameters = ""
nscript_enable = 0
nscript_prio_disk_full = 1
nscript_cats = *,
[pushover]
pushover_prio_error = 1
pushover_enable = 0
pushover_prio_complete = -1
pushover_prio_warning = 1
pushover_prio_startup = -3
pushover_prio_queue_done = -1
pushover_prio_other = -3
pushover_prio_pp = -3
pushover_prio_disk_full = 1
pushover_device = ""
pushover_token = <REMOVED>
pushover_prio_new_login = -3
pushover_prio_failed = -1
pushover_prio_download = -2
pushover_userkey = <REMOVED>
pushover_cats = *,
[growl]
growl_prio_disk_full = 1
growl_enable = 0
growl_prio_new_login = 0
growl_prio_other = 0
growl_prio_download = 0
growl_server = <REMOVED>
growl_prio_startup = 1
growl_prio_failed = 1
growl_prio_queue_done = 1
growl_prio_warning = 0
growl_prio_error = 0
growl_prio_complete = 1
growl_prio_pp = 0
growl_password = <REMOVED>
growl_cats = *,
[prowl]
prowl_prio_disk_full = 1
prowl_prio_error = -3
prowl_prio_download = -3
prowl_enable = 0
prowl_prio_failed = 1
prowl_prio_pp = -3
prowl_prio_new_login = -3
prowl_apikey = <REMOVED>
prowl_prio_startup = -3
prowl_prio_warning = -3
prowl_prio_other = -3
prowl_prio_complete = 0
prowl_prio_queue_done = 0
prowl_cats = *,
[acenter]
acenter_prio_warning = 0
acenter_prio_disk_full = 1
acenter_prio_new_login = 0
acenter_prio_error = 0
acenter_prio_failed = 1
acenter_prio_startup = 0
acenter_prio_queue_done = 1
acenter_enable = 1
acenter_prio_complete = 1
acenter_prio_download = 0
acenter_prio_pp = 0
acenter_prio_other = 0
acenter_cats = *,
[ntfosd]
ntfosd_prio_queue_done = 1
ntfosd_enable = 0
ntfosd_prio_error = 0
ntfosd_prio_startup = 1
ntfosd_prio_complete = 1
ntfosd_prio_pp = 0
ntfosd_prio_warning = 0
ntfosd_prio_other = 0
ntfosd_prio_disk_full = 1
ntfosd_prio_new_login = 0
ntfosd_prio_download = 0
ntfosd_prio_failed = 1
ntfosd_cats = *,
[pushbullet]
pushbullet_prio_download = 0
pushbullet_prio_queue_done = 0
pushbullet_enable = 0
pushbullet_prio_complete = 1
pushbullet_prio_warning = 0
pushbullet_device = ""
pushbullet_prio_failed = 1
pushbullet_prio_other = 0
pushbullet_apikey = <REMOVED>
pushbullet_prio_disk_full = 1
pushbullet_prio_new_login = 0
pushbullet_prio_pp = 0
pushbullet_prio_startup = 0
pushbullet_prio_error = 0
pushbullet_cats = *,
[servers]................. etc