Install Flags and Not Aborting w/missing blocks

Report & discuss bugs found in SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Post Reply
ncfitzge
Newbie
Newbie
Posts: 4
Joined: May 6th, 2017, 1:28 pm

Install Flags and Not Aborting w/missing blocks

Post by ncfitzge »

Hey, I have notice two issues:

1. I used to be able to use the FORCE_MANUAL_INSTALL flag in the log directory to update to the latest version. Since 2.0.0, I haven't been able to use that anymore.

2. I have SAB set to do pre-check, it notices there are a lot of missing blocks but continues to download it even though I have it marked to abort download.

Code: Select all

2017-05-06 14:34:26,612::INFO::[SABnzbd:1170] --------------------------------
2017-05-06 14:34:26,612::INFO::[SABnzbd:1171] SABnzbd.py-2.0.0 (rev=55c4bef5247d51fa92db1c08ce3af6ec6601fdbf)
2017-05-06 14:34:26,612::INFO::[SABnzbd:1172] Full executable path = /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/sabnzbd/SABnzbd.py
2017-05-06 14:34:26,612::INFO::[SABnzbd:1184] Platform = posix
2017-05-06 14:34:26,612::INFO::[SABnzbd:1185] Python-version = 2.7.13 (default, Apr 24 2017, 15:51:42) 
[GCC 6.3.0]
2017-05-06 14:34:26,612::INFO::[SABnzbd:1186] Arguments = SABnzbd.py -f //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/sabnzbd.ini --browser 0 --daemon --pid /tmp
2017-05-06 14:34:26,612::INFO::[SABnzbd:1191] Preferred encoding = UTF-8
2017-05-06 14:34:26,612::DEBUG::[SABnzbd:1205] My local IPv4 address = <IP>
2017-05-06 14:34:26,814::DEBUG::[SABnzbd:1211] My public IPv4 address = <IP
2017-05-06 14:34:26,816::DEBUG::[SABnzbd:1219] Could not determine my IPv6 address
2017-05-06 14:34:26,823::DEBUG::[SABnzbd:1225] CPU Pystone available performance is 195350
2017-05-06 14:34:26,823::DEBUG::[SABnzbd:1230] CPU model name is Intel(R) Core(TM) i7-4790S CPU @ 3.20GHz
2017-05-06 14:34:26,823::INFO::[SABnzbd:1232] Read INI file //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/sabnzbd.ini
2017-05-06 14:34:26,823::INFO::[__init__:995] Loading data for rss_data.sab from //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/rss_data.sab
2017-05-06 14:34:26,828::INFO::[__init__:995] Loading data for totals10.sab from //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/totals10.sab
2017-05-06 14:34:26,828::DEBUG::[bpsmeter:189] Read quota q=9.663676416e+11 l=7.2014300369e+11 reset=1496289600.0
2017-05-06 14:34:26,828::INFO::[postproc:93] Loading postproc queue
2017-05-06 14:34:26,828::INFO::[__init__:995] Loading data for postproc2.sab from //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/postproc2.sab
2017-05-06 14:34:26,836::INFO::[postproc:87] Saving postproc queue
2017-05-06 14:34:26,836::INFO::[__init__:971] Saving data for postproc2.sab in //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/postproc2.sab
2017-05-06 14:34:26,882::INFO::[__init__:995] Loading data for queue10.sab from //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/queue10.sab
2017-05-06 14:34:26,882::DEBUG::[downloader:165] Initializing downloader/decoder
2017-05-06 14:34:26,882::INFO::[__init__:995] Loading data for watched_data2.sab from //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/watched_data2.sab
2017-05-06 14:34:26,883::INFO::[__init__:995] Loading data for Rating.sab from //share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/Rating.sab
2017-05-06 14:34:26,894::DEBUG::[scheduler:175] Scheduling RSS interval task every 60 min (delay=53)
2017-05-06 14:34:26,894::DEBUG::[scheduler:187] Scheduling VersionCheck on day 3 at 13:53
2017-05-06 14:34:26,894::DEBUG::[bpsmeter:393] Will reset quota at (2017, 6, 1, 0, 0, 0, 0, 0, 1)
2017-05-06 14:34:26,894::INFO::[scheduler:193] Setting schedule for quota check daily at 0:0
2017-05-06 14:34:26,894::INFO::[scheduler:197] Setting schedule for midnight BPS reset
2017-05-06 14:34:26,894::DEBUG::[__init__:585] PAUSED_ALL inactive
2017-05-06 14:34:26,894::INFO::[__init__:351] All processes started
2017-05-06 14:34:26,894::INFO::[SABnzbd:286] Web dir is /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/sabnzbd/interfaces/Glitter
2017-05-06 14:34:26,894::INFO::[SABnzbd:286] Web dir is /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/sabnzbd/interfaces/Config
2017-05-06 14:34:26,912::INFO::[SABnzbd:410] SABYenc module (v3.0.2)... found!
2017-05-06 14:34:26,912::INFO::[SABnzbd:427] Cryptography module (v1.5.1)... found!
2017-05-06 14:34:26,912::INFO::[SABnzbd:432] par2 binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/par2)
2017-05-06 14:34:26,912::INFO::[SABnzbd:437] par2cmdline binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/par2)
2017-05-06 14:34:26,912::INFO::[SABnzbd:440] UNRAR binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/unrar)
2017-05-06 14:34:26,912::DEBUG::[SABnzbd:448] UNRAR binary version 5.40
2017-05-06 14:34:26,912::INFO::[SABnzbd:453] unzip binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/unzip)
2017-05-06 14:34:26,912::INFO::[SABnzbd:458] 7za binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/7za)
2017-05-06 14:34:26,912::INFO::[SABnzbd:464] nice binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/nice)
2017-05-06 14:34:26,912::INFO::[SABnzbd:468] ionice binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/ionice)
2017-05-06 14:34:26,912::INFO::[SABnzbd:1277] SSL version OpenSSL 1.0.2k  26 Jan 2017
2017-05-06 14:34:26,912::INFO::[SABnzbd:1278] SSL supported protocols ['TLS v1.2', 'TLS v1.1', 'TLS v1']
2017-05-06 14:34:26,915::INFO::[SABnzbd:1393] Starting web-interface on 0.0.0.0:9095
2017-05-06 14:34:26,915::INFO::[_cplogging:219] [06/May/2017:14:34:26] ENGINE Bus STARTING
2017-05-06 14:34:26,916::INFO::[_cplogging:219] [06/May/2017:14:34:26] ENGINE Started monitor thread '_TimeoutMonitor'.
2017-05-06 14:34:27,071::INFO::[_cplogging:219] [06/May/2017:14:34:27] ENGINE Serving on https://0.0.0.0:9095
Startup Log

Code: Select all

Performing SABnzbdplus prestartup checks at Sat May  6 14:34:15 EDT 2017...
HEAD is now at 80c8ad5 remove -o from 7zip. Reverses #1149 Fixes #1175
Already up-to-date.
 Checking environment
  Checking if all configured directories exist.../etc/init.d/sabnzbd.sh: line 141: [: /share/Download/Processing/NZB/NZB: binary operator expected
.... Done
  Creating Symbolic links for required utils. Done
Done
Already up-to-date.
Starting SABnzbdplus Done (Sat May  6 14:34:29 EDT 2017)
Any suggestions on how to get it to abort and get the control flags back?

Thanks
Top
User avatar
safihre
Administrator
Administrator
Posts: 5362
Joined: April 30th, 2015, 7:35 am
Contact:
Contact safihre

Re: Install Flags and Not Aborting w/missing blocks

Post by safihre »

The flag is not from sabnzbd, but the package or installation you use for sabnzbd. Sabnzbd doesn't provide update mechanisms.
Should report that to the package source/maintainer.

Are you able to set your package to use 2.0.1Rc1? Maybe it fixes your precheck problem.
On vacation now so can't dig into the logs you posted, unfortunately. Will try to take a look when I get back!
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Top
ncfitzge
Newbie
Newbie
Posts: 4
Joined: May 6th, 2017, 1:28 pm

Re: Install Flags and Not Aborting w/missing blocks

Post by ncfitzge »

Yes, I was able to install 2.0.1RC1 and it is not aborting. It was missing over 200 pieces and still went on to download. Double checked the settings and it still setup to abort.
Top
ncfitzge
Newbie
Newbie
Posts: 4
Joined: May 6th, 2017, 1:28 pm

Re: Install Flags and Not Aborting w/missing blocks

Post by ncfitzge »

I've been doing some testing. And it does not look like it is trying to do par2 is working. It goes straight to unrar check and once that fails it kicks in the user scripts.

If I run par2repair on its own, it fixes it and then I can unrar successfully.

I noticed under Settings-->Switches-->Post processing -- I have no option to enable 'Enable MultiCore par2' like it has on the wiki, just an option to download all par2 and extra par2 parameters.
I do have allow_64bit_tools checked in Special
Also the sabnzbdplus.ini still has par2_multicore = 0

Startup Log

Code: Select all

2017-05-09 16:50:55,413::INFO::[SABnzbd:1167] --------------------------------
2017-05-09 16:50:55,413::INFO::[SABnzbd:1168] SABnzbd.py-2.0.1RC1 (rev=2f52590587bf3e06100e410da1b83f35383244cb)
2017-05-09 16:50:55,413::INFO::[SABnzbd:1169] Full executable path = /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/SABnzbd.py
2017-05-09 16:50:55,413::INFO::[SABnzbd:1181] Platform = posix
2017-05-09 16:50:55,413::INFO::[SABnzbd:1182] Python-version = 2.7.13 (default, Apr 24 2017, 15:51:42) 
[GCC 6.3.0]
2017-05-09 16:50:55,413::INFO::[SABnzbd:1183] Arguments = SABnzbd.py -f Config/sabnzbd.ini --browser 0 --daemon --pid /tmp
2017-05-09 16:50:55,413::INFO::[SABnzbd:1188] Preferred encoding = UTF-8
2017-05-09 16:50:55,413::DEBUG::[SABnzbd:1202] My local IPv4 address = <>
2017-05-09 16:50:55,582::DEBUG::[SABnzbd:1208] My public IPv4 address = <>
2017-05-09 16:50:55,583::DEBUG::[SABnzbd:1216] Could not determine my IPv6 address
2017-05-09 16:50:55,590::DEBUG::[SABnzbd:1222] CPU Pystone available performance is 196850
2017-05-09 16:50:55,590::DEBUG::[SABnzbd:1227] CPU model name is Intel(R) Core(TM) i7-4790S CPU @ 3.20GHz
2017-05-09 16:50:55,590::INFO::[SABnzbd:1229] Read INI file /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/sabnzbd.ini
2017-05-09 16:50:55,591::INFO::[__init__:995] Loading data for rss_data.sab from /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/rss_data.sab
2017-05-09 16:50:55,591::INFO::[__init__:995] Loading data for totals10.sab from /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/totals10.sab
2017-05-09 16:50:55,591::DEBUG::[bpsmeter:189] Read quota q=9.663676416e+11 l=9.19753733466e+11 reset=1496271600.0
2017-05-09 16:50:55,591::INFO::[postproc:93] Loading postproc queue
2017-05-09 16:50:55,591::INFO::[__init__:995] Loading data for postproc2.sab from /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/postproc2.sab
2017-05-09 16:50:55,591::INFO::[__init__:995] Loading data for queue10.sab from /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/queue10.sab
2017-05-09 16:50:55,591::DEBUG::[downloader:165] Initializing downloader/decoder
2017-05-09 16:50:55,592::INFO::[__init__:995] Loading data for watched_data2.sab from /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/watched_data2.sab
2017-05-09 16:50:55,592::INFO::[__init__:995] Loading data for Rating.sab from /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/Config/admin/Rating.sab
2017-05-09 16:50:55,602::DEBUG::[scheduler:175] Scheduling RSS interval task every 60 min (delay=20)
2017-05-09 16:50:55,602::DEBUG::[scheduler:187] Scheduling VersionCheck on day 1 at 23:17
2017-05-09 16:50:55,603::DEBUG::[bpsmeter:393] Will reset quota at (2017, 6, 1, 0, 0, 0, 0, 0, 1)
2017-05-09 16:50:55,603::INFO::[scheduler:193] Setting schedule for quota check daily at 0:0
2017-05-09 16:50:55,603::INFO::[scheduler:197] Setting schedule for midnight BPS reset
2017-05-09 16:50:55,603::DEBUG::[__init__:585] PAUSED_ALL inactive
2017-05-09 16:50:55,603::INFO::[__init__:351] All processes started
2017-05-09 16:50:55,603::INFO::[SABnzbd:286] Web dir is /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/interfaces/Glitter
2017-05-09 16:50:55,603::INFO::[SABnzbd:286] Web dir is /share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/interfaces/Config
2017-05-09 16:50:55,659::INFO::[SABnzbd:410] SABYenc module (v3.0.2)... found!
2017-05-09 16:50:55,659::INFO::[SABnzbd:427] Cryptography module (v1.5.1)... found!
2017-05-09 16:50:55,659::INFO::[SABnzbd:432] par2 binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/par2)
2017-05-09 16:50:55,659::INFO::[SABnzbd:437] par2cmdline binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/par2)
2017-05-09 16:50:55,659::INFO::[SABnzbd:440] UNRAR binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/unrar)
2017-05-09 16:50:55,659::DEBUG::[SABnzbd:448] UNRAR binary version 5.40
2017-05-09 16:50:55,659::INFO::[SABnzbd:453] unzip binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/unzip)
2017-05-09 16:50:55,659::INFO::[SABnzbd:458] 7za binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/7za)
2017-05-09 16:50:55,659::INFO::[SABnzbd:464] nice binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/nice)
2017-05-09 16:50:55,659::INFO::[SABnzbd:468] ionice binary... found (/share/CACHEDEV1_DATA/.qpkg/SABnzbdplus/x64/bin-utils/ionice)
2017-05-09 16:50:55,660::INFO::[SABnzbd:1274] SSL version OpenSSL 1.0.2k  26 Jan 2017
2017-05-09 16:50:55,660::INFO::[SABnzbd:1275] SSL supported protocols ['TLS v1.2', 'TLS v1.1', 'TLS v1']
2017-05-09 16:50:55,662::INFO::[SABnzbd:1386] Starting web-interface on 0.0.0.0:9095
2017-05-09 16:50:55,662::INFO::[_cplogging:219] [09/May/2017:16:50:55] ENGINE Bus STARTING
2017-05-09 16:50:55,663::INFO::[_cplogging:219] [09/May/2017:16:50:55] ENGINE Started monitor thread '_TimeoutMonitor'.
2017-05-09 16:50:55,797::INFO::[_cplogging:219] [09/May/2017:16:50:55] ENGINE Serving on https://0.0.0.0:9095
2017-05-09 16:51:23,564::INFO::[interface:586] Successful login from <>
2017-05-09 16:51:45,954::INFO::[_cplogging:219] [09/May/2017:16:51:45] ENGINE Serving on http://0.0.0.0:0
2017-05-09 16:51:45,954::INFO::[_cplogging:219] [09/May/2017:16:51:45] ENGINE Bus STARTED
2017-05-09 16:51:45,954::INFO::[zconfig:64] No Bonjour/ZeroConfig support installed
2017-05-09 16:51:45,954::INFO::[SABnzbd:1424] Starting SABnzbd.py-2.0.1RC1
2017-05-09 16:51:45,954::DEBUG::[__init__:362] Starting postprocessor
2017-05-09 16:51:45,955::DEBUG::[__init__:365] Starting assembler
2017-05-09 16:51:45,956::DEBUG::[__init__:368] Starting downloader
2017-05-09 16:51:45,956::DEBUG::[scheduler:209] Starting scheduler
2017-05-09 16:51:45,958::INFO::[dirscanner:316] Dirscanner starting up
2017-05-09 16:51:45,959::DEBUG::[__init__:378] Starting urlgrabber
2017-05-09 16:51:45,959::INFO::[postproc:174] Completed Download Folder /share/Download/Processing/Default is not on FAT
2017-05-09 16:51:45,959::INFO::[urlgrabber:72] URLGrabber starting up
2017-05-09 16:51:45,991::DEBUG::[__init__:1203] Test IPv6: Cannot reach IPv6 test host. Disabling IPv6
2017-05-09 16:51:45,991::DEBUG::[downloader:397] External IPv6 test result: False
2017-05-09 16:51:46,077::DEBUG::[downloader:413] SSL verification test: True
Top
User avatar
safihre
Administrator
Administrator
Posts: 5362
Joined: April 30th, 2015, 7:35 am
Contact:
Contact safihre

Re: Install Flags and Not Aborting w/missing blocks

Post by safihre »

We would need to see the part of the log that does the par2 (need to enable Debug logging to see that).
The precheck is less sensitive than the actual download, but you see also during the actual download that it doesn't Abort?
The number of articles actually doesn't say a lot. Because articles can be anywhere between 32kb and 800kb. Internally Sab knows that, and it will only Abort if the actual number of bytes of the repair set is lower than the number of missing bytes.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Top
Post Reply

Return to “Bug Reports”