I'm running version 2.3.6 [190ec0a] on qnap TS-219PII firmware 4.3.3.0724 install using shipera.
During some downloads the I get disconnected from the webpage, what I know so far is:
- I get an Err_Connection_refused on reconnect
- Sabnzbd process isn't running anymore
- I restart using the qnap app centre
- This is in the logs 2019-01-07 11:13:54,514::ERROR::[nzbstuff:1537] Error importing <NzbFile: filename=<HASH>ed7455a.part55.rar, type=None>
Any help on resolving this is appreciated.
Sabnzbd crashing on qnap
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Sabnzbd crashing on qnap
Hi and welcome to the forum.
Can you please post the SAB init log? This can be viewed with:
Can you please post the SAB init log? This can be viewed with:
Code: Select all
cat /var/log/SABnzbdplus.log
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
Re: Sabnzbd crashing on qnap
Thank you, this is the last start
-------------------- start requested --------------------
= Mon Jan 7 11:13:07 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
-------------------- start requested --------------------
= Mon Jan 7 11:13:07 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
Re: Sabnzbd crashing on qnap
Can you please post the last few start/stops? I'm trying to see if the stop event is recorded.
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
Re: Sabnzbd crashing on qnap
Can't seem to post it... "New user are not allowed to post links".
Re: Sabnzbd crashing on qnap
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): -------------------- stop requested --------------------
= Sun Jan 6 19:45:55 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Sun Jan 6 19:46:04 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
-------------------- stop requested --------------------
= Mon Jan 7 10:30:10 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Mon Jan 7 10:30:17 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
-------------------- stop requested --------------------
= Mon Jan 7 11:13:00 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Mon Jan 7 11:13:07 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
* starting (SABnzbdplus): -------------------- stop requested --------------------
= Sun Jan 6 19:45:55 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Sun Jan 6 19:46:04 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
-------------------- stop requested --------------------
= Mon Jan 7 10:30:10 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Mon Jan 7 10:30:17 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
-------------------- stop requested --------------------
= Mon Jan 7 11:13:00 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Mon Jan 7 11:13:07 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
Re: Sabnzbd crashing on qnap
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): -------------------- stop requested --------------------
= Sun Jan 6 19:31:03 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Sun Jan 6 19:31:21 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
From git://github.com/clinton-hall/nzbToMedia
e1fe633..f9f3faf master -> origin/master
* [new tag] 12.0.5 -> 12.0.5
* [new tag] 12.0.2 -> 12.0.2
* [new tag] 12.0.2-rc.1 -> 12.0.2-rc.1
* [new tag] 12.0.3 -> 12.0.3
* [new tag] 12.0.3-rc.1 -> 12.0.3-rc.1
* [new tag] 12.0.4 -> 12.0.4
* [new tag] 12.0.4-rc.1 -> 12.0.4-rc.1
* [new tag] 12.0.5-rc.1 -> 12.0.5-rc.1
Updating e1fe633..f9f3faf
Fast-forward
.bumpversion.cfg | 2 +-
README.md | 2 +-
TorrentToMedia.py | 2 +-
cleanup.py | 45 +++++++++++++++++++++++++++++++++++++++++----
core/__init__.py | 2 +-
core/auto_process/movies.py | 5 ++++-
core/version_check.py | 2 +-
nzbToMedia.py | 2 +-
setup.py | 2 +-
9 files changed, 52 insertions(+), 12 deletions(-)
* starting (SABnzbdplus): -------------------- stop requested --------------------
= Sun Jan 6 19:31:03 EST 2019
= (SABnzbdplus) is not active
-------------------- start requested --------------------
= Sun Jan 6 19:31:21 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
From git://github.com/clinton-hall/nzbToMedia
e1fe633..f9f3faf master -> origin/master
* [new tag] 12.0.5 -> 12.0.5
* [new tag] 12.0.2 -> 12.0.2
* [new tag] 12.0.2-rc.1 -> 12.0.2-rc.1
* [new tag] 12.0.3 -> 12.0.3
* [new tag] 12.0.3-rc.1 -> 12.0.3-rc.1
* [new tag] 12.0.4 -> 12.0.4
* [new tag] 12.0.4-rc.1 -> 12.0.4-rc.1
* [new tag] 12.0.5-rc.1 -> 12.0.5-rc.1
Updating e1fe633..f9f3faf
Fast-forward
.bumpversion.cfg | 2 +-
README.md | 2 +-
TorrentToMedia.py | 2 +-
cleanup.py | 45 +++++++++++++++++++++++++++++++++++++++++----
core/__init__.py | 2 +-
core/auto_process/movies.py | 5 ++++-
core/version_check.py | 2 +-
nzbToMedia.py | 2 +-
setup.py | 2 +-
9 files changed, 52 insertions(+), 12 deletions(-)
Re: Sabnzbd crashing on qnap
before that it looks like an upgrade...
create mode 100644 libs/win/test_path.py
delete mode 100644 libs/xdg/BaseDirectory.py
delete mode 100644 libs/xdg/DesktopEntry.py
delete mode 100644 libs/xdg/Exceptions.py
delete mode 100644 libs/xdg/IconTheme.py
delete mode 100644 libs/xdg/IniFile.py
delete mode 100644 libs/xdg/Locale.py
delete mode 100644 libs/xdg/Menu.py
delete mode 100644 libs/xdg/MenuEditor.py
delete mode 100644 libs/xdg/Mime.py
delete mode 100644 libs/xdg/RecentFiles.py
delete mode 100644 libs/xdg/__init__.py
delete mode 100644 libs/xdg/util.py
delete mode 100644 libs/yaml/__init__.py
delete mode 100644 libs/yaml/representer.py
delete mode 100644 libs/yaml/resolver.py
delete mode 100644 libs/yaml/scanner.py
create mode 100644 libs/win/test_path.py
delete mode 100644 libs/xdg/BaseDirectory.py
delete mode 100644 libs/xdg/DesktopEntry.py
delete mode 100644 libs/xdg/Exceptions.py
delete mode 100644 libs/xdg/IconTheme.py
delete mode 100644 libs/xdg/IniFile.py
delete mode 100644 libs/xdg/Locale.py
delete mode 100644 libs/xdg/Menu.py
delete mode 100644 libs/xdg/MenuEditor.py
delete mode 100644 libs/xdg/Mime.py
delete mode 100644 libs/xdg/RecentFiles.py
delete mode 100644 libs/xdg/__init__.py
delete mode 100644 libs/xdg/util.py
delete mode 100644 libs/yaml/__init__.py
delete mode 100644 libs/yaml/representer.py
delete mode 100644 libs/yaml/resolver.py
delete mode 100644 libs/yaml/scanner.py
Re: Sabnzbd crashing on qnap
That "stopping" line shouldn't be there. Your init log shows that it's repeated each time SAB is supposed to be starting.nis14 wrote: ↑January 6th, 2019, 11:12 pm -------------------- start requested --------------------
= Sun Jan 6 19:46:04 EST 2019
= (SABnzbdplus) is not active
* updating (SABnzbdplus): OK
Already up to date.
* updating (nzbToMedia): OK
Already up to date.
* stopping (SABnzbdplus) with SIGTERM: stopped OK in 0 seconds
* starting (SABnzbdplus): OK
What version is your SABnzbd QPKG? This is shown in your QTS App Center.
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
Re: Sabnzbd crashing on qnap
In App Center is says SABnzbdplus 180909.... I installed it with shirpa
Re: Sabnzbd crashing on qnap
Yup, that's the latest one.
Can you please download and run the newest sherpa script and use it to reinstall SAB?
Can you please download and run the newest sherpa script and use it to reinstall SAB?
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
Re: Sabnzbd crashing on qnap
Just had a thought: are you running two instances of SAB?
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
Re: Sabnzbd crashing on qnap
I've recently reinitialised the NAS and fresh installed SAB so shouldn't be running two...
Only one process running
[~] # ps ax | grep -i sabnzbd | grep -v grep
14328 admin 61964 S /opt/bin/python2.7 SABnzbd.py --daemon --config-file /share/MD0_DATA/.qpkg/SABnzbdplus/config/config.ini --browser 0 --pidfile /tm
Only one process running
[~] # ps ax | grep -i sabnzbd | grep -v grep
14328 admin 61964 S /opt/bin/python2.7 SABnzbd.py --daemon --config-file /share/MD0_DATA/.qpkg/SABnzbdplus/config/config.ini --browser 0 --pidfile /tm
Re: Sabnzbd crashing on qnap
I've updated SAb
[/share/Public] # curl -ksO https://raw.githubusercontent.com/onecd ... /sherpa.sh && chmod +x sherpa.sh
[/share/Public] # ./sherpa.sh SABnzbd
sherpa.sh (190106)
[ done ] downloaded sherpa package list
[ done ] downloaded QPKG (SABnzbdplus_180909.qpkg)
[ done ] updated Entware package list
[ done ] no IPKGs are required
[ done ] downloaded & installed (PIP modules)
[ done ] daemon stopped (sabnzbd.sh)
[ done ] created 'SABnzbdplus' settings backup
[ done ] uninstalled QPKG 'SABnzbdplus'
[ done ] installed QPKG (SABnzbdplus_180909.qpkg)
[ done ] wait complete
[ done ] daemon stopped (sabnzbd.sh)
[ done ] restored 'SABnzbdplus' settings backup
[ done ] daemon started (sabnzbd.sh)
[ done ] 'SABnzbdplus' has been successfully reinstalled!
- To display the debug log:
cat /share/Public/sherpa.debug.log
[/share/Public] # curl -ksO https://raw.githubusercontent.com/onecd ... /sherpa.sh && chmod +x sherpa.sh
[/share/Public] # ./sherpa.sh SABnzbd
sherpa.sh (190106)
[ done ] downloaded sherpa package list
[ done ] downloaded QPKG (SABnzbdplus_180909.qpkg)
[ done ] updated Entware package list
[ done ] no IPKGs are required
[ done ] downloaded & installed (PIP modules)
[ done ] daemon stopped (sabnzbd.sh)
[ done ] created 'SABnzbdplus' settings backup
[ done ] uninstalled QPKG 'SABnzbdplus'
[ done ] installed QPKG (SABnzbdplus_180909.qpkg)
[ done ] wait complete
[ done ] daemon stopped (sabnzbd.sh)
[ done ] restored 'SABnzbdplus' settings backup
[ done ] daemon started (sabnzbd.sh)
[ done ] 'SABnzbdplus' has been successfully reinstalled!
- To display the debug log:
cat /share/Public/sherpa.debug.log
Re: Sabnzbd crashing on qnap
Agree.
Yup, looks good.
BTW: I can now see why that "stopping" line is appearing in the log. Here's the first few lines of the 'start' function:
Code: Select all
StartQPKG()
{
local returncode=0
local msg=''
local exec_msgs=''
[[ -e $STORED_PID_PATHFILE ]] && StopQPKG
I'll have to do some work on this separate problem, but the bad news is it won't stop your SAB from crashing again. It will only help it recover better.
Unfortunately, with QNAP models like yours that have a fixed 512MB RAM, there's an intermittent issue between QTS, the Python interpreter installed via Entware, and SAB that causes this sudden SAB shutdown.
No-one has been able to work out why it happens. In fact, there was another user only this morning who's SAB was also disappearing, but their NAS model has only 256MB RAM. Unless it can be found why this crash occurs, the only thing I can suggest is a NAS upgrade. This doesn't occur with models that have 1GB or more of RAM.
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE