I think I broke Something, Help!

Get help with all aspects of SABnzbd
Forum rules
Help us help you:
  • Are you using the latest stable version of SABnzbd? Downloads page.
  • Tell us what system you run SABnzbd on.
  • Adhere to the forum rules.
  • Do you experience problems during downloading?
    Check your connection in Status and Interface settings window.
    Use Test Server in Config > Servers.
    We will probably ask you to do a test using only basic settings.
  • Do you experience problems during repair or unpacking?
    Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Post Reply
gimpacause
Newbie
Newbie
Posts: 10
Joined: September 9th, 2013, 10:42 am

I think I broke Something, Help!

Post by gimpacause »

hi guys been using sab for years without issue, recently i replaced my server and set everything up just fine, then nzb360 would not connect to sab no matter what i adjusted,

well i think i adjusted to much, sab service is running but no apps can access it, nor can i get the web gui up, i've had a look through my ini file and cant seem to find anything out of place, any ideas of where i should start looking, thank you
Top
gimpacause
Newbie
Newbie
Posts: 10
Joined: September 9th, 2013, 10:42 am

Re: I think I broke Something, Help!

Post by gimpacause »

hi guys just an update

upon restarting everything i noticed in]on other systems i had SSL errors, so i started going through the .ini and I found i had enabled SSL, removed hose settings , now i'm getting

connection refused,

i'm going to attempt to get a firefox window running over ssh so i can check the settings in the gui,


any other ideas, thanks
Top
User avatar
sander
Release Testers
Release Testers
Posts: 8829
Joined: January 22nd, 2008, 2:22 pm

Re: I think I broke Something, Help!

Post by sander »

on what OS is SABnzbd running?

check with your process viewer and netstat if SAB is running, and if so, listen on which port.
Top
gimpacause
Newbie
Newbie
Posts: 10
Joined: September 9th, 2013, 10:42 am

Re: I think I broke Something, Help!

Post by gimpacause »

OS is UBUNTU 18.04

The service is active (running)

Ill post back netstat results when I'm in front of the pc, thanks
Top
gimpacause
Newbie
Newbie
Posts: 10
Joined: September 9th, 2013, 10:42 am

Re: I think I broke Something, Help!

Post by gimpacause »

well I don't know what's changed, just tried to log in to sabnzbd and it worked, I'll keep an eye on it over the next few days and post back if anything happpedsx,


thank you
Top
gimpacause
Newbie
Newbie
Posts: 10
Joined: September 9th, 2013, 10:42 am

Re: I think I broke Something, Help!

Post by gimpacause »

Ok, so got sabnbzd working when connected to the local network,

Still can't access from external IP, what should I be looking at?

This has previously been working for several years

Thank you
Top
User avatar
sander
Release Testers
Release Testers
Posts: 8829
Joined: January 22nd, 2008, 2:22 pm

Re: I think I broke Something, Help!

Post by sander »

External IP = Internet? If so: router nat port forwarding. Not a SAB thing.
Top
gimpacause
Newbie
Newbie
Posts: 10
Joined: September 9th, 2013, 10:42 am

Re: I think I broke Something, Help!

Post by gimpacause »

hi sander, thank you for the help please mark this as closed i sorted out the issue

thought everything was configured correctly then i saw your reply and thought i would check out the router

i had forwarded the internal port of 8080 and when resetting everything else i accidentally typed 8081 as my router shows internal ip's only until i actually started digging into the settings and i saw Internal:8080 external:8081, i hate isp provided tech :-\

i would of been tearing things apart had you not clued me into the router

again, many thanks
Top
User avatar
sander
Release Testers
Release Testers
Posts: 8829
Joined: January 22nd, 2008, 2:22 pm

Re: I think I broke Something, Help!

Post by sander »

Good!
Top
Post Reply

Return to “General Help”