Hi
Uisng SABnzbd successfully on a linux enabled NAS unit - NSLU2.
I wondered if anyone else was using it.
The main problems I have are that I can't get email to work - not sure if I need a third party app; and
I can't seem to get the post processing script to initiate directly (I can run it manually).
Are these issues individual to me or do others have the same problem?
Cheers
SABnzbd on NAS equivalent unit - anyone else?
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: SABnzbd on NAS equivalent unit - anyone else?
I have an NSLU2 (and 2 LinkStations) but I haven't tried it, because I've heard it runs too slow.
What speeds are you getting?
I'm running HellaNZB on my LinkStation Live (400MHz ARM9 with 128MB RAM) and it's pretty fast. I can max out my 20mbit line with 4 connections. Assembling the posts is horribly slow though.
I'd love to get SAB running on my LinkStation if it can run fast enough.
What speeds are you getting?
I'm running HellaNZB on my LinkStation Live (400MHz ARM9 with 128MB RAM) and it's pretty fast. I can max out my 20mbit line with 4 connections. Assembling the posts is horribly slow though.
I'd love to get SAB running on my LinkStation if it can run fast enough.
Re: SABnzbd on NAS equivalent unit - anyone else?
I only have a 2m/bit connection so no issue re speed. I think SABnzbd allows you to restrict speed anyway so you should be able to get it working well, albeit slightly slower than your 20m/bit connection.
My nslu2 runs pretty well and download between 200 and 230k/s depending on time of day. The processing works really well too.
The only prob that I have is if I try and watch something through xbox media centre when its unpacking the files, there is noticable slow down, but other than that its fantastic! Love the fact that I don't have to have a pc running all the time, can also log into home network from work using putty and firefox to add files remotely.
would just like to get the email feature running so i know when i need to go back into it . . .
My nslu2 runs pretty well and download between 200 and 230k/s depending on time of day. The processing works really well too.
The only prob that I have is if I try and watch something through xbox media centre when its unpacking the files, there is noticable slow down, but other than that its fantastic! Love the fact that I don't have to have a pc running all the time, can also log into home network from work using putty and firefox to add files remotely.
would just like to get the email feature running so i know when i need to go back into it . . .
Re: SABnzbd on NAS equivalent unit - anyone else?
The email function relies on perl.
Try installing perl:
# ipkg install perl
If it still doesn't work, look at your logs. The first few lines when opening the program should say whether the perl module was found.
Would be nice to find out what max speed you can get so we can look at optimizing the downloading code.
Try installing perl:
# ipkg install perl
If it still doesn't work, look at your logs. The first few lines when opening the program should say whether the perl module was found.
Speed has been reported to be much faster using 0.3.0 final on NAS systems. However not sure if it will utilize your full 20Mbit.neilt0 wrote: I have an NSLU2 (and 2 LinkStations) but I haven't tried it, because I've heard it runs too slow.
What speeds are you getting?
I'm running HellaNZB on my LinkStation Live (400MHz ARM9 with 128MB RAM) and it's pretty fast. I can max out my 20mbit line with 4 connections. Assembling the posts is horribly slow though.
I'd love to get SAB running on my LinkStation if it can run fast enough.
Would be nice to find out what max speed you can get so we can look at optimizing the downloading code.
Last edited by switch on January 22nd, 2008, 11:06 am, edited 1 time in total.
Re: SABnzbd on NAS equivalent unit - anyone else?
Is it not possible to forward the port sab uses , so you can also use your browser to loginmanks wrote: Love the fact that I don't have to have a pc running all the time, can also log into home network from work using putty and firefox to add files remotely.
would just like to get the email feature running so i know when i need to go back into it . . .
Re: SABnzbd on NAS equivalent unit - anyone else?
To be honest, I'm not a Linux person at all, so installing all the dependencies is going to be tricky for me unless they are ipkg'd already, and I'm reluctant to do all the research needed only to find out there's not enough RAM to run SAB without swapping.switch wrote: Speed has been reported to be much faster using 0.3.0 final on NAS systems. However not sure if it will utilize your full 20Mbit.
Would be nice to find out what max speed you can get so we can look at optimizing the downloading code.
Is 128MB enough?
I'm going to post on the LinkStation forums as I know someone there has looked in to this. Then I'll report back here.
Re: SABnzbd on NAS equivalent unit - anyone else?
OK, replying to my own post, I'm going to follow the directions at http://www.mobileforum.nl/viewtopic.php?p=1688
and see if I can get it working for myself. Wish me luck!
and see if I can get it working for myself. Wish me luck!
Re: SABnzbd on NAS equivalent unit - anyone else?
Well, I got SABnzbd 0.3.0 working very easily!
It works beautifully on the LinkStation Live. Very, very nice. Download speeds are about 1,000kB/sec, about half my max throughput, but it assembles as it downloads, so I don't mind -- I haven't benchmarked against hella, but I think it must be faster overall.
More speed would be great, but for now, it's excellent.
It works beautifully on the LinkStation Live. Very, very nice. Download speeds are about 1,000kB/sec, about half my max throughput, but it assembles as it downloads, so I don't mind -- I haven't benchmarked against hella, but I think it must be faster overall.
More speed would be great, but for now, it's excellent.
Re: SABnzbd on NAS equivalent unit - anyone else?
Yes, able to log into browser and add files using putty, its cool.rascalli wrote:Is it not possible to forward the port sab uses , so you can also use your browser to loginmanks wrote: Love the fact that I don't have to have a pc running all the time, can also log into home network from work using putty and firefox to add files remotely.
would just like to get the email feature running so i know when i need to go back into it . . .
Managed to install perl, but not had chance to play around with email yet - will prob get round to it at weekend.
Anyone else using post processing script successfully through SAB - and indeed have one that they would like to share specifically written for NAS drive?
Cheers
Re: SABnzbd on NAS equivalent unit - anyone else?
Email is not working on my LinkStation either. Works on my PC. Perl in installed.manks wrote: Managed to install perl, but not had chance to play around with email yet - will prob get round to it at weekend.
Is there something in the logs I can look for to debug?
Re: SABnzbd on NAS equivalent unit - anyone else?
I think email is working now. Has a 502 error, but does appear to be working. Can't post more of the log as the forum has errors.
Here's a snippet of my log:
But after that it has:
And emails are arriving.
Here's a snippet of my log:
Code: Select all
sendEmail.pl[28482]: ERROR => Received: 502 Error: command not implemented
Code: Select all
Jan 24 16:09:36 lslive sendEmail.pl[28760]: Email was sent successfully!
Re: SABnzbd on NAS equivalent unit - anyone else?
Care to advise how you got it working? I tried it briefly and emails weren't going through. Cheers
Re: SABnzbd on NAS equivalent unit - anyone else?
I just installed Perl. Took a while for the email to percolate through to my server, so have a look to see if any arrived on yours.
Check the log to see if there any errors, and check your email config in the ini.
Check the log to see if there any errors, and check your email config in the ini.
Re: SABnzbd on NAS equivalent unit - anyone else?
I get the following error:
an 25 23:15:30 nas sendEmail.pl[539]: ERROR => Timeout while reading from smtp.gmail.com:465 There was no response after 60 seconds.
I've just used the settings in the wiki? Any guidance appreciated.
Neilt0 - Any good at script writing? Do you plan to use the post processing function?
an 25 23:15:30 nas sendEmail.pl[539]: ERROR => Timeout while reading from smtp.gmail.com:465 There was no response after 60 seconds.
I've just used the settings in the wiki? Any guidance appreciated.
Neilt0 - Any good at script writing? Do you plan to use the post processing function?
Re: SABnzbd on NAS equivalent unit - anyone else?
Use your ISP's SMTP server.