Hello,
SABnzbd Version 4.3.1
I tried it on a HP Laptop Elite book and a PC with a 12gen I7
I have tried both easynews and newsdemon
I have tried both SABnzb and NZBGet with the same issues
I am experiencing authentication issues with SABnzbd when trying to connect to news demon server. I have tried multiple solutions, but the problem persists. Below is a detailed description of the steps I have taken:
Issue Description:
SABnzbd Error: "Authentication failed, check username/password."
Steps Taken:
Verified Credentials:
Double-checked username and password for typos.
Ensured no leading or trailing spaces.
Server Configuration:
SABnzbd settings:
Host: news.newsdemon (dot com as i can't post this with a "Link")
Port: 119 (for non-SSL) or 563 (for SSL)
SSL: Tried both enabled and disabled based on port.
Connections: Tried starting with 1 connection.
Telnet Test:
Successfully connected to news.newsdemon (dot com as i can't post this with a "Link") on port 119 using Telnet:
"200 Welcome (n08.iad1)"
Changed DNS Settings:
Updated router DNS settings to use Google DNS:
Primary: 8.8.8.8
Secondary: 8.8.4.4
Verified DNS change using nslookup:
"Non-authoritative answer:
Name: google (dot com as i can't post this with a "Link")
Addresses:
2607:f8b0:4023:66
2607:f8b0:4023:8a
2607:f8b0:4023:71
2607:f8b0:4023:65
142.250.114.113
142.250.114.139
142.250.114.102
142.250.114.100
142.250.114.138
142.250.114.101"
Router Settings:
Ensured router firmware is up to date (Netgear Nighthawk RAX42V2).
Authentication Issues with SABnzbd
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.