NAS died - can’t get SAB working on new NAS
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
NAS died - can’t get SAB working on new NAS
Hi everyone,
My Synology NAS died and I have lost everything. I have set up a new Synology NAS and have just installed SABnzb. It has been. A very long time since I did this previously.
I used default settings, copied NZB key to my indexer and opened up port 8080 TCP/UDP on my router.
My indexer site says it has “added to queue” as it always does, but nothing is happening on SAB.
I have restarted server, router but still nothing.
Does anyone have any ideas? Very frustrated with losing my original NAS and not being able to get new one working.
Thanks in advance.
My Synology NAS died and I have lost everything. I have set up a new Synology NAS and have just installed SABnzb. It has been. A very long time since I did this previously.
I used default settings, copied NZB key to my indexer and opened up port 8080 TCP/UDP on my router.
My indexer site says it has “added to queue” as it always does, but nothing is happening on SAB.
I have restarted server, router but still nothing.
Does anyone have any ideas? Very frustrated with losing my original NAS and not being able to get new one working.
Thanks in advance.
Re: NAS died - can’t get SAB working on new NAS
Did you add your Usenet providers as servers?
Have you tested them?
Have you tested them?
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
Yes tested usenet serves and tests were successful
Re: NAS died - can’t get SAB working on new NAS
If your indexer supports bookmarks/carts, might be safer to configure SAB to access your bookmarks via an RSS feed. This means SAB will pull your NZBs instead of the indexer pushing them.
Stuff I like: Apache bash cron DD-WRT Debian DNSMasq Entware FireFox GitHub ImageMagick Kate KDE LibreELEC Netrunner NFS NVIDIA OpenVPN Orvibo-S20 pfSense Python Raspberry-Pi RAID SABnzbd Transmission Usenet VirtualBox Watcher3 XFCE
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
What is so frustrating is that everything I have done used to work previously. I wonder if it is something to do with permissions on my NAS. The DSM 7 looks a bit different to how I remember sadly.
Re: NAS died - can’t get SAB working on new NAS
In SABnzbd's upper right corner, click on the wrench symbol ("Status and interface options"), then click on first tab Status, click Test download 1GB. After downloading,ShacoUnica wrote: ↑January 4th, 2025, 3:53 am What is so frustrating is that everything I have done used to work previously. I wonder if it is something to do with permissions on my NAS. The DSM 7 looks a bit different to how I remember sadly.
... does it download, without errors?
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
Test download of 1gb completed successfully
Re: NAS died - can’t get SAB working on new NAS
Good. Then follow the advice https://forums.sabnzbd.org/viewtopic.ph ... 84#p132984
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
Ok so an update.
If I manually drop nzb into watch folder SAB will download and extract - so that’s significant progress.
However I still can’t get NZB Planet to automatically send Nzb to SAB despite having the correct IP/port and NZB api key.
It always used to work. Any ideas?
Thanks
If I manually drop nzb into watch folder SAB will download and extract - so that’s significant progress.
However I still can’t get NZB Planet to automatically send Nzb to SAB despite having the correct IP/port and NZB api key.
It always used to work. Any ideas?
Thanks
Re: NAS died - can’t get SAB working on new NAS
It has to do with portforwarding, fixed ip on lan, and possibly CGNAT. And that's difficult stuff.ShacoUnica wrote: ↑January 5th, 2025, 4:20 pm Ok so an update.
If I manually drop nzb into watch folder SAB will download and extract - so that’s significant progress.
However I still can’t get NZB Planet to automatically send Nzb to SAB despite having the correct IP/port and NZB api key.
It always used to work. Any ideas?
Thanks
So ... easier: RSS feeds. Let SABnzbd pull from your indexer. With your webbrowser, go to your indexer, and find the RSS URL for "cart". Put that URL into SABnzbd's RSS settings ... done.
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
Thanks I will try that now
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
Thanks that works
-
- Newbie
- Posts: 9
- Joined: January 4th, 2025, 3:21 am
Re: NAS died - can’t get SAB working on new NAS
Actually no it doesn’t. I have added a few NZBs to cart. Struggling to find the url
Found it - sorted
Found it - sorted