I have managed to install sabnzb+ 0.5.3 on freenas. It works well but it takes ages before the actual download starts.
First I tried the 119 port with a normal connection. After reading some info in this forum I switched to SSL connection.
Also I have limited the number of connections to 8. My usenet supplier is newsconnection and they offer 16 connections. I have the 150mbit connection.
My internet connection is 60mbit.
Does anyone has the same issues?
When the download starts my speeds are fine.
It takes ages before download begins
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
- Newbie
- Posts: 19
- Joined: July 1st, 2010, 2:10 pm
Re: It takes ages before download begins
The delay could be caused by a mis-configured DNS.
What happens if you use the numerical IP address of your Usenet server instead of its normal name?
What happens if you use the numerical IP address of your Usenet server instead of its normal name?
-
- Newbie
- Posts: 19
- Joined: July 1st, 2010, 2:10 pm
Re: It takes ages before download begins
I have tried the numerical IP adress but it looks like it doesn't solve the issue
Re: It takes ages before download begins
We see this problem (except for the numerical IP) in varying degrees.
On Windows DNS resolving is instantaneous, on OSX it takes less than a second.
On the Unix variants it can take anything between seconds and minutes.
Very likely a problem with the Python library (or the way we use it).
We will look at this for a future release.
On Windows DNS resolving is instantaneous, on OSX it takes less than a second.
On the Unix variants it can take anything between seconds and minutes.
Very likely a problem with the Python library (or the way we use it).
We will look at this for a future release.
-
- Newbie
- Posts: 19
- Joined: July 1st, 2010, 2:10 pm
Re: It takes ages before download begins
Right now it is working ok. After selecting the nzb it starts directly with the download.
I have only changed the newsserver adress into numerical.
At the time I did that it did not make any change.
So I assume that it was linked to a issue at the provider site.
I have only changed the newsserver adress into numerical.
At the time I did that it did not make any change.
So I assume that it was linked to a issue at the provider site.