Uninstalled and manually removed the rest and after reinstall all is working good now. Thanks!kiorky wrote: I personnaly did not have the problem whereas i did never do fresh install but only upgrades from 0.4.12 to 0.5.
You may have forgot/failed to merge (dispatch-conf/etc-update) the configuration file which change a bit (diretories) between 0.4 & 0.5.
Just remerge, and check your configuration file.
If the problem persists, i think you have some garbage leftover somewhere or your history database in bad state.
Maybe purging all but your configuration file (/etc/sabnzbd.conf) that you 'll backup somewhere can help and be the quick and dirty way to fix your installation.
You can also trying first to bakcupdelete the sqlite files in:
/var/lib/sabnzbd/admin/history1.db
/var/lib/sabnzbd/dirscan/history1.db
For example, i could have done that to do the operation:Then remerge itCode: Select all
emerge -C sabnzbd # backup what is backupable in /var/lib/sabnzbd (like the complete folder ;) ) rm -rf /var/lib/sabzbd /etc/sabnzbd /usr/share/sabnzbd*
And grab some bits from the bakuped configuration file without copying it as-is.Code: Select all
emerge sabnzbd
Code: Select all
vimdiff ~/sabznbd.conf /etc/sabnzbd/sabnzbd.conf
Installing sabnzbd on gentoo [updated to 0.5.6]
Re: Installing sabnzbd on gentoo [updated to 0.5.0-final]
Re: Installing sabnzbd on gentoo [updated to 0.5.0-final]
hi,
i sucessfully installed sabnzbd with de overlay, but it seems to need a cheetah install (with emerge), what i've done,
but this is my problem :
on my system, python 2.5 and 2.6 are installed (2.6 for emerge and others apps, 2.5 for sabnzbd), but 2.5 don't use the cheetah that i've emerged so :
i can launch sabnzbd with 2.6 but with a lot of bugs (= not usable), and 2.5 won't start, it returns : "The following modules need to be installed: Cheetah, cherrypy(included, unpack the zip), sqlite(if python 2.4)"
(sqlite is installed of course).
Someone can help ?
thanks
i sucessfully installed sabnzbd with de overlay, but it seems to need a cheetah install (with emerge), what i've done,
but this is my problem :
on my system, python 2.5 and 2.6 are installed (2.6 for emerge and others apps, 2.5 for sabnzbd), but 2.5 don't use the cheetah that i've emerged so :
i can launch sabnzbd with 2.6 but with a lot of bugs (= not usable), and 2.5 won't start, it returns : "The following modules need to be installed: Cheetah, cherrypy(included, unpack the zip), sqlite(if python 2.4)"
(sqlite is installed of course).
Someone can help ?
thanks
Re: Installing sabnzbd on gentoo [updated to 0.5.0-final]
0.5.0 fully supports Python 2.6, at least if it's a decent implementation.
We test primarily with 2.6.
We test primarily with 2.6.
Re: Installing sabnzbd on gentoo [updated to 0.5.0-final]
Hi,
i cant install sabnzb, too:
layman -L -o http://hg.cryptelium.net/hg/system/gent ... layman.xml
=> * cryptelium [Mercurial ] (https://hg.cryptelium.net/hg/system/g...)
layman -a cryptelium
* Overlay "cryptelium" does not exist.
Any ideas? Did an emerge mercurial & layman before this..
i cant install sabnzb, too:
layman -L -o http://hg.cryptelium.net/hg/system/gent ... layman.xml
=> * cryptelium [Mercurial ] (https://hg.cryptelium.net/hg/system/g...)
layman -a cryptelium
* Overlay "cryptelium" does not exist.
Any ideas? Did an emerge mercurial & layman before this..
Re: Installing sabnzbd on gentoo [updated to 0.5.4]
You need to have mercurial installed.
Thanks for the installation instructions. Works here on Sabayon 5.4![Smiley :)](./images/smilies/smiley.gif)
Thanks for the installation instructions. Works here on Sabayon 5.4
![Smiley :)](./images/smilies/smiley.gif)
Last edited by csop19 on October 30th, 2010, 5:40 pm, edited 1 time in total.
-
- Newbie
- Posts: 4
- Joined: November 9th, 2010, 8:18 am
Re: Installing sabnzbd on gentoo [updated to 0.5.4]
same here, cryptelium does not exist. Mercurial is installed and i have other overlays using mercurial working.
i downloaded the ebuilds manually and they installed fine, but i don't see any config files neiter can is a start stop script in /etc/init.d.
Can somebody help plz?
i downloaded the ebuilds manually and they installed fine, but i don't see any config files neiter can is a start stop script in /etc/init.d.
Can somebody help plz?
Re: Installing sabnzbd on gentoo [updated to 0.5.4]
Be sure to use last layman version:chrisk2305 wrote: same here, cryptelium does not exist. Mercurial is installed and i have other overlays using mercurial working.
i downloaded the ebuilds manually and they installed fine, but i don't see any config files neiter can is a start stop script in /etc/init.d.
Can somebody help plz?
layman --version
1.3.3
-
- Newbie
- Posts: 4
- Joined: November 9th, 2010, 8:18 am
Re: Installing sabnzbd on gentoo [updated to 0.5.4]
thanks for your reply, but it still doesn't work, though i have cryptelium in my list, it is not used and I can't add it via layman:
Code: Select all
fileserver ~ # layman --version
1.4.1
fileserver ~ # layman -a cryptelium
* Overlay "cryptelium" does not exist.
fileserver ~ # layman -l
* arcon [Mercurial ] (https://arcon.googlecode.com/hg/ )
* cryptelium [Mercurial ] (https://hg.cryptelium.net/hg/system/gentoo/overlay )
* gentoo-quebec [Subversion] (https://gentoo-quebec.org/svn/gentoo-quebec/trunk/overlay/ )
* nx [Subversion] (svn://overlays.gentoo.org/proj/nx/testing )
* x11 [Git ] (git://git.overlays.gentoo.org/proj/x11
Re: Installing sabnzbd on gentoo [updated to 0.5.4]
I had the same trouble, keeps bugging me about cryptelium. So I first did a sync of layman and after that a nice update. Worked like a charm! ;)
Code: Select all
prime ~ # layman -S
prime ~ # PORTDIR_OVERLAY=/var/lib/layman/cryptelium ACCEPT_KEYWORDS="~amd64" emerge -av sabnzbd
Last edited by Rowdy.nl on December 28th, 2010, 9:44 am, edited 1 time in total.
Re: Installing sabnzbd on gentoo [updated to 0.5.6]
Got my sab working here via the overlays.
The only issue I am having is the /etc/init.d/sabnzbd script is not starting sab in daemon mode.
If I do it manually it works fine, brings be back to the bash prompt, if I use the script it doesn't and I get all the log output... this at start up is a problem.
For now I am starting it manually in a screen so it doesn't interfere.
On closer inspection, the init.d script has the -d switch and I have played around with syntax and such but it still doesn't start in daemon mode properly.
Any ideas?
The only issue I am having is the /etc/init.d/sabnzbd script is not starting sab in daemon mode.
If I do it manually it works fine, brings be back to the bash prompt, if I use the script it doesn't and I get all the log output... this at start up is a problem.
For now I am starting it manually in a screen so it doesn't interfere.
On closer inspection, the init.d script has the -d switch and I have played around with syntax and such but it still doesn't start in daemon mode properly.
Any ideas?
Re: Installing sabnzbd on gentoo [updated to 0.5.6]
Any chance to have beta/RC version with this overlay ?
Thanks for the job done
Thanks for the job done
Re: Installing sabnzbd on gentoo [updated to 0.5.6]
cherrypy is now in the main gentoo portage ![Smiley :)](./images/smilies/smiley.gif)
I'm still having problems with the above, daemon mode works on the command line, but not in my init.d script :/
![Smiley :)](./images/smilies/smiley.gif)
I'm still having problems with the above, daemon mode works on the command line, but not in my init.d script :/
Re: Installing sabnzbd on gentoo [updated to 0.5.6]
SABnzbd will only work with the specific CherryPy release included in our source distribution.malaky wrote: cherrypy is now in the main gentoo portage![]()
-
- Newbie
- Posts: 1
- Joined: May 20th, 2011, 10:08 am
Re: Installing sabnzbd on gentoo [updated to 0.5.6]
Any chance of getting 0.6.1 Final added to the overlay?
I will say a in place upgrade wasn't too difficult.
I cleared out my queue first, and them stopped SABnzbd, replaced the symlink to the new scripts, and restarted SABnzbd.
I'm not sure why, but SABnzbd kept wanting to make a temp copy of the conf file, which was initially installed (by default I believe) to /etc/. Permissions denied it, so I moved the conf to my sabznbd home folder, changed the /etc/conf.d/ file to reflect the move, and fired SABnzbd back up. No further issues.
I will say that I'm not too fond of the way it upgraded my history. It botched the totals a huge bit. (50TB down to 1008G ?)
I will say a in place upgrade wasn't too difficult.
I cleared out my queue first, and them stopped SABnzbd, replaced the symlink to the new scripts, and restarted SABnzbd.
I'm not sure why, but SABnzbd kept wanting to make a temp copy of the conf file, which was initially installed (by default I believe) to /etc/. Permissions denied it, so I moved the conf to my sabznbd home folder, changed the /etc/conf.d/ file to reflect the move, and fired SABnzbd back up. No further issues.
I will say that I'm not too fond of the way it upgraded my history. It botched the totals a huge bit. (50TB down to 1008G ?)
Last edited by IhatemyISP on May 20th, 2011, 12:56 pm, edited 1 time in total.