SabNZBd on Opensolaris?

mad99 · Post by **mad99** » January 6th, 2009, 12:59 pm

Hi Forum,
is anyone running SabNZBd on OpenSolaris (2008.11) successfully?
I am planning to build my fileserver with Solaris and it would be a nice add-on to have Sab running there, too?

Post by **shypike** » January 8th, 2009, 6:41 am

Provided Python 2.5 is available, it's not very hard to install it.
Most of the required packages can be installed manually.
There's only one exception: that's the yEnc package (it requires a C compiler).
If you do not install it, SABnzbd will work, only a bit slower.

Look at this page for more info:
http://sabnzbd.wikidot.com/install-cc42

Starting at where cheetah-2.0.1 is mentioned.
You can skip the CherrPy part.

The biggest challenges may be par2cmdline.
Unrar you can get pre-built here: http://www.rarlab.com/rar_add.htm

BTW: I assume you're looking at Solaris for Intel/AMD (and not SPARC).

Post by **shypike** » January 8th, 2009, 6:52 am

Actually, a number of Python things are present in Sun's package manager.
Python
unzip
pyopenssl

So Cheetah, yEnc, par2cmdline and unrar you'll have to install manually.
You can do without yEnc.

mad99 · Post by **mad99** » January 8th, 2009, 10:29 pm

Thx for your help, I will try it as soon as I have my OS-Box running...
Btw. yes you are right, I am using the OSx86, not Sparc.

Update:
I managed to install/compile & run SabNZBd on my Solaris Box:
root@opensolaris:/daten/public/SabNZBd/SABnzbd-0.4.2# python2.5 ./SABnzbd.py -b0 -s 0.0.0.0:8080
2009-01-11 19:00:48,677::INFO::--------------------------------
2009-01-11 19:00:48,678::INFO::SABnzbd.py-0.4.2 (rev=1447)
2009-01-11 19:00:48,678::INFO::Platform = posix
2009-01-11 19:00:48,679::INFO::Python-version = 2.5.2 (r252:60911, Oct 7 2008, 08:56:44) [C]
2009-01-11 19:00:48,682::INFO::[sabnzbd] Loading data for rss_data.sab from /root/.sabnzbd/cache/rss_data.sab
2009-01-11 19:00:48,685::INFO::[sabnzbd] Loading data for bytes7.sab from /root/.sabnzbd/cache/bytes7.sab
2009-01-11 19:00:48,685::INFO::[sabnzbd] Loading data for queue7.sab from /root/.sabnzbd/cache/queue7.sab
2009-01-11 19:00:48,686::INFO::All processes started
2009-01-11 19:00:48,688::INFO::_yenc module... found!
2009-01-11 19:00:48,688::INFO::celementtree module... found!
2009-01-11 19:00:48,689::ERROR::par2 binary... NOT found!
2009-01-11 19:00:48,689::INFO::rar binary... found (/usr/sbin/unrar)
2009-01-11 19:00:48,690::INFO::unzip binary... found (/usr/bin/unzip)
2009-01-11 19:00:48,690::INFO::pyOpenSSL... NOT found - try apt-get install python-pyopenssl (SSL is optional)
2009-01-11 19:00:48,774::INFO::Web dir is /daten/public/SabNZBd/SABnzbd-0.4.2/interfaces/Default
2009-01-11 19:00:48,779::INFO::Starting SABnzbd.py-0.4.2
2009-01-11 19:00:48,781::INFO::[nzbqueue] Saving queue
2009-01-11 19:00:48,782::INFO::[sabnzbd] Saving data for queue7.sab in /root/.sabnzbd/cache/queue7.sab
2009-01-11 19:00:48,782::INFO::[sabnzbd] Saving data for bytes7.sab in /root/.sabnzbd/cache/bytes7.sab
2009-01-11 19:00:48,783::INFO::[sabnzbd] Saving data for rss_data.sab in /root/.sabnzbd/cache/rss_data.sab
2009-01-11 19:00:48,850::INFO::[sabnzbd.misc] URLGrabber starting up
2009-01-11 19:00:48,860::INFO::Starting web-interface on :8080
11/Jan/2009:19:00:48 CONFIG INFO Server parameters:
11/Jan/2009:19:00:48 CONFIG INFO server.environment: production
11/Jan/2009:19:00:48 CONFIG INFO server.log_to_screen: True
11/Jan/2009:19:00:48 CONFIG INFO server.log_file: /root/.sabnzbd/logs/cherrypy.log
11/Jan/2009:19:00:48 CONFIG INFO server.log_tracebacks: True
11/Jan/2009:19:00:48 CONFIG INFO server.log_request_headers: False
11/Jan/2009:19:00:48 CONFIG INFO server.protocol_version: HTTP/1.0
11/Jan/2009:19:00:48 CONFIG INFO server.socket_host:
11/Jan/2009:19:00:48 CONFIG INFO server.socket_port: 8080
11/Jan/2009:19:00:48 CONFIG INFO server.socket_file:
11/Jan/2009:19:00:48 CONFIG INFO server.reverse_dns: False
11/Jan/2009:19:00:48 CONFIG INFO server.socket_queue_size: 5
11/Jan/2009:19:00:48 CONFIG INFO server.thread_pool: 10
11/Jan/2009:19:00:49 HTTP INFO Serving HTTP on http://0.0.0.0:8080/

but right now I don't get the GUI in my browser, just the following output on the console(local and remote):
::ffff:127.0.0.1 - - [11/Jan/2009:19:01:46] "GET /favicon.ico HTTP/1.1" 200 1406 "" "Mozilla/5.0 (X11; U; SunOS i86pc; de; rv:1.9.0.4) Gecko/2008111710 Firefox/3.0.4"
::ffff:127.0.0.1 - - [11/Jan/2009:19:03:35] "GET / HTTP/1.1" 200 - "" "Mozilla/5.0 (X11; U; SunOS i86pc; de; rv:1.9.0.4) Gecko/2008111710 Firefox/3.0.4"

after editing the .ini I downloaded a .nzb file for verification of funtionality, just the GUI is not shown :-(

Post by **shypike** » January 11th, 2009, 3:56 pm

SABnzbd only has a web interface, remember?
Which URL did you use in your browser?

BTW why are you using release 0.4.2? We're on 0.4.6 now.

mad99 · Post by **mad99** » January 11th, 2009, 7:51 pm

WebInterface was what I meant by writing GUI

thats why I wrote I don't get the GUI in my browser...

Post by **sander** » January 12th, 2009, 5:12 am

mad99 wrote:
11/Jan/2009:19:00:49 HTTP INFO Serving HTTP on http://0.0.0.0:8080/

but right now I don't get the GUI in my browser, just the following output on the console(local and remote):
::ffff:127.0.0.1 - - [11/Jan/2009:19:01:46] "GET /favicon.ico HTTP/1.1" 200 1406 "" "Mozilla/5.0 (X11; U; SunOS i86pc; de; rv:1.9.0.4) Gecko/2008111710 Firefox/3.0.4"
::ffff:127.0.0.1 - - [11/Jan/2009:19:03:35] "GET / HTTP/1.1" 200 - "" "Mozilla/5.0 (X11; U; SunOS i86pc; de; rv:1.9.0.4) Gecko/2008111710 Firefox/3.0.4"

after editing the .ini I downloaded a .nzb file for verification of funtionality, just the GUI is not shown :-(

You're using an incorrect URL in your webbrowser: you should use http://localhost:8080/sabnzbd and not http://localhost:8080/

Your log says "GET / HTTP/1.1", whereas correct URL results in logging "GET /sabnzbd HTTP/1.1", like here:

Code: Select all

05/Oct/2008:10:41:51 HTTP INFO Serving HTTP on http://0.0.0.0:8080/
2008-10-05 10:41:51,720::INFO::Lauching browser with http://localhost:8080/sabnzbd
2008-10-05 10:41:51,757::INFO::[downloader] [email protected]:119: Initiating connection
2008-10-05 10:41:51,829::INFO::[downloader] [email protected]:563: Initiating connection
::ffff:127.0.0.1 - - [05/Oct/2008:10:41:52] "GET /sabnzbd HTTP/1.1" 302 - "" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092510 Ubuntu/8.04 (hardy) Firefox/3.0.3"

HTH

Post by **sander** » January 12th, 2009, 5:45 am

shypike wrote: Provided Python 2.5 is available, it's not very hard to install it.

@shypike:

BTW: Is there any experience with SABnzbd on Python 2.6? OpenSUSE 11.1 has introduced Python 2.6, it seems.

switch · Post by **switch** » January 12th, 2009, 7:42 am

We don't support Python 2.6
I believe most bits work, however whenever sabnzbd does it's internal restart, such as when saving certain config values, the program exits.

Post by **sander** » January 12th, 2009, 10:35 am

switch wrote: We don't support Python 2.6
I believe most bits work, however whenever sabnzbd does it's internal restart, such as when saving certain config values, the program exits.

OK. I'm still "safe" for at least 10 months as Ubuntu 9.04 Jaunty will still have python 2.5: http://packages.ubuntu.com/jaunty/python mentions "Package: python (2.5.2-3ubuntu1)"

Post by **shypike** » January 12th, 2009, 11:43 am

switch wrote: We don't support Python 2.6

We use about 10 different packages from other parties (either embedded or installed Python modules).
These aren't all compatible with Python 2.6.
We keep an eye on progress in that area.

A transfer to Python 3 might be years away.

mad99 · Post by **mad99** » January 14th, 2009, 5:54 am

@shypike:
thx for pointing out this stupid error :-) I must havr read this a thousand times while thinking what could be the problem... So now I know: the user (me) ist the problem...

jordz · Post by **jordz** » January 14th, 2009, 7:36 am

I'm using python 2.6 @ Arch Linux.

Installed these packages from Arch: 'python-cheetah' 'python-feedparser' 'python-yenc' 'pyopenssl'

I only get a few warnings at startup, but it works fine

I'm using the cherrypy provided by sabnzbd.
I got the same warning when using cherrpy provided by Arch.

/opt/sabnzbd/cherrypy/lib/cptools.py:4: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
/opt/sabnzbd/cherrypy/lib/sessions.py:16: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
/opt/sabnzbd/cherrypy/_cperror.py:190: DeprecationWarning: BaseException.message has been deprecated as of Python 2.6
self.message = message

Post by **shypike** » January 14th, 2009, 9:38 am

I think "deprecated" is just a warning and should not interfere with normal operation.

However, there can be all sorts of subtle incompatibilities in other areas.

mad99 · Post by **mad99** » January 14th, 2009, 11:19 am

I am using Python 2.52 on osol and didn't get any errors/warnings. atm everything is running, I even have a webinterface

Support Forum

SabNZBd on Opensolaris?

SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?

Re: SabNZBd on Opensolaris?