Using v5.5.0 installed on a W2K8 server, remote admin is either not working 99% of the time, though I have connected once or twice. The fact I have connected at all is confusing and does seem to indicate that config on the server is OK ?
Using port 9091 and HTTPS, mutliple PCs I am connecting from are on the same LAN. Tried IE8, IE9 and firefox.
Checked and have 0.0.0.0 as host IP. Tried switching off firewall on the server (though sabnzbd is added as an exception).
Tried installing to a second PC and even a VM on the server and both are working fine.
Any ideas on what to try next ?
Very slow remote admin on W2K8 server
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Very slow remote admin on W2K8 server
So far the team has no experience with Server 2008.
There have been some mixed reports, but little usable feedback.
Do you see any improvement if you use HTTP on port 8080 instead of HTTPS on 9090?
There have been some mixed reports, but little usable feedback.
Do you see any improvement if you use HTTP on port 8080 instead of HTTPS on 9090?